AutoCodes – Chevrolet – B008F 2015 Chevrolet Silverado

B008F 2015 Chevrolet Silverado Code - Rollover Protection Disable Switch

Quick Answer

When the ignition switch is turned to ON, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within inflatable restraint sensing and diagnostic module itself. Common causes include Faulty Rollover Protection Disable Switch, Rollover Protection Disable Switch harness is open or shorted, Rollover Protection Disable Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B008F 2015 Chevrolet Silverado indicates Rollover Protection Disable Switch.
Common causes: Common causes include Faulty Rollover Protection Disable Switch, Rollover Protection Disable Switch harness is open or shorted, Rollover Protection Disable Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 509

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 24, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B008F 2015 Chevrolet Silverado Description

When the ignition switch is turned to ON, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within inflatable restraint sensing and diagnostic module itself. The inflatable restraint sensing and diagnostic module continuously checks the rollover protection disable switch position and circuit defect by letting the regular voltage flow through the rollover protection disable switch circuit and verifying the current.

OBDII Code B008F 2015 Chevrolet Silverado - Rollover Protection Disable Switch - AutoCodes.com — B008F 2015 Chevrolet Silverado Code - Rollover Protection Disable Switch

What does this mean?

What are the Possible Causes of the DTC B008F 2015 Chevrolet Silverado?

Faulty Rollover Protection Disable Switch
Rollover Protection Disable Switch harness is open or shorted
Rollover Protection Disable Switch circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B008F 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B008F:02 Rollover Protection Disable Switch Circuit Short to Ground
B008F:05 Rollover Protection Disable Switch Circuit High Voltage/Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B008F 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B008F 2015 Chevrolet Silverado code?

Need more information on how to fix the B008F 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B008F 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B008F 2015 Chevrolet Silverado Code

1. What does the OBDII code B008F on a 2015 Chevrolet Silverado indicate?

- The code B008F specifically refers to the Rollover Protection Disable Switch in a 2015 Chevrolet Silverado.

2. What are the common symptoms of a Rollover Protection Disable Switch issue?

- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the vehicle's restraint system.

3. What could cause the B008F code to trigger in a 2015 Chevrolet Silverado?

- The most common causes of the B008F code are a faulty rollover protection disable switch, damaged wiring related to the switch, or a malfunction in the vehicle's airbag system.

4. How can I diagnose a Rollover Protection Disable Switch problem in my 2015 Chevrolet Silverado?

- To diagnose the issue, you may need a professional OBDII scanner to read and interpret the B008F code, followed by a thorough inspection of the rollover protection disable switch and its wiring.

5. Can I still drive my 2015 Chevrolet Silverado with the B008F code present?

- It is not recommended to drive the vehicle with the B008F code active, as it indicates a potential problem with the rollover protection system, which could compromise safety in the event of an accident.

6. What are the repair options for fixing the B008F code in a 2015 Chevrolet Silverado?

- Repair options include replacing the faulty rollover protection disable switch, repairing any damaged wiring, and resetting the airbag system to clear the code.

7. Is it possible to reset the B008F code in a 2015 Chevrolet Silverado without repairing the issue?

- While you can clear the code temporarily by resetting the vehicle's computer, it is crucial to address the underlying problem with the rollover protection disable switch to ensure proper safety functionality.

8. How much does it typically cost to repair a Rollover Protection Disable Switch issue in a 2015 Chevrolet Silverado?

- The cost of repairing a Rollover Protection Disable Switch problem can vary depending on the extent of the damage and whether you choose to do the repair yourself or take it to a professional mechanic.

9. Can a DIY enthusiast replace the Rollover Protection Disable Switch in a 2015 Chevrolet Silverado?

- While it is possible for experienced DIY enthusiasts to replace the rollover protection disable switch, it is recommended to have the repair done by a qualified mechanic to ensure proper installation and safety compliance.

10. Are there any recalls or technical service bulletins related to the B008F code in 2015 Chevrolet Silverado models?

- It is advisable to check with Chevrolet or a certified dealership for any open recalls or technical service bulletins related to the B008F code in 2015 Silverado models, as manufacturers sometimes issue remedies for known issues.