AutoCodes – Chevrolet – B008F 2014 Chevrolet Silverado

B008F 2014 Chevrolet Silverado Code - Rollover Protection Disable Switch

Quick Answer

When the ignition switch is turned to ON, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within inflatable restraint sensing and diagnostic module itself. Common causes include Faulty Rollover Protection Disable Switch, Rollover Protection Disable Switch harness is open or shorted, Rollover Protection Disable Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B008F 2014 Chevrolet Silverado indicates Rollover Protection Disable Switch.
Common causes: Common causes include Faulty Rollover Protection Disable Switch, Rollover Protection Disable Switch harness is open or shorted, Rollover Protection Disable Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 547

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 24, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B008F 2014 Chevrolet Silverado Description

When the ignition switch is turned to ON, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within inflatable restraint sensing and diagnostic module itself. The inflatable restraint sensing and diagnostic module continuously checks the rollover protection disable switch position and circuit defect by letting the regular voltage flow through the rollover protection disable switch circuit and verifying the current.

OBDII Code B008F 2014 Chevrolet Silverado - Rollover Protection Disable Switch - AutoCodes.com — B008F 2014 Chevrolet Silverado Code - Rollover Protection Disable Switch

What does this mean?

What are the Possible Causes of the DTC B008F 2014 Chevrolet Silverado?

Faulty Rollover Protection Disable Switch
Rollover Protection Disable Switch harness is open or shorted
Rollover Protection Disable Switch circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B008F 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B008F:02 Rollover Protection Disable Switch Circuit Short to Ground
B008F:05 Rollover Protection Disable Switch Circuit High Voltage/Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B008F 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B008F 2014 Chevrolet Silverado code?

Need more information on how to fix the B008F 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B008F 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B008F 2014 Chevrolet Silverado Code

1. What does OBDII code B008F in a 2014 Chevrolet Silverado indicate?

- OBDII code B008F refers to the Rollover Protection Disable Switch circuit malfunction in the vehicle.

2. What are the common symptoms of a Rollover Protection Disable Switch issue in a Chevrolet Silverado?

- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential loss of rollover protection system functionality.

3. What could cause the B008F OBDII code to trigger in a 2014 Silverado?

- The B008F code can be triggered by a faulty Rollover Protection Disable Switch, damaged wiring in the circuit, or a malfunctioning control module.

4. How can I diagnose a Rollover Protection Disable Switch problem in my Chevrolet Silverado?

- A comprehensive diagnostic scan using an OBDII scanner is recommended to pinpoint the exact cause of the B008F code and determine if the switch, wiring, or control module is at fault.

5. Can I continue driving my Silverado with the B008F code present?

- It is not advised to continue driving the vehicle with the B008F code active, as it indicates a potential issue with the rollover protection system, compromising safety in the event of an accident.

6. Is it possible to reset the B008F code in a Chevrolet Silverado?

- Resetting the B008F code may temporarily turn off the warning light, but it is crucial to address the underlying issue causing the fault code to prevent safety risks.

7. How much does it typically cost to repair a Rollover Protection Disable Switch problem in a 2014 Silverado?

- The cost of repairing a Rollover Protection Disable Switch issue can vary depending on the exact cause of the problem, but it may involve replacing the switch, repairing wiring, or reprogramming the control module.

8. Can I fix a B008F code in my Chevrolet Silverado myself?

- While some DIY enthusiasts may attempt to diagnose and repair a Rollover Protection Disable Switch problem, it is recommended to seek professional assistance to ensure the issue is properly resolved for safety reasons.

9. Will a Rollover Protection Disable Switch issue affect the overall performance of my Silverado?

- While the primary concern with a Rollover Protection Disable Switch problem is related to safety features, it may also impact the vehicle's overall performance if left unresolved due to potential system malfunctions.

10. How often should I have the Rollover Protection system checked in my Chevrolet Silverado to prevent B008F code issues?

- Regular maintenance checks, including inspections of the Rollover Protection system, are recommended as part of routine vehicle servicing to detect and address issues before they trigger fault codes like B008F.