B008F:02 Code - Rollover Protection Disable Switch Circuit Short to Ground
Quick Answer
When the ignition switch is turned to ON, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will perform turn-on tests to diagnose critical malfunctions within the inflatable restraint sensing and the diagnostic module itself. Common causes include Faulty Rollover Protection Disable Switch, Rollover Protection Disable Switch harness is open or shorted, Rollover Protection Disable Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B008F:02 indicates Rollover Protection Disable Switch Circuit Short to Ground.
- Common causes
- Common causes include Faulty Rollover Protection Disable Switch, Rollover Protection Disable Switch harness is open or shorted, Rollover Protection Disable Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B008F:02 Description
What are the Possible Causes of the DTC B008F:02?
- Faulty Rollover Protection Disable Switch
- Rollover Protection Disable Switch harness is open or shorted
- Rollover Protection Disable Switch circuit poor electrical connection
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
How to Fix the DTC B008F:02?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B008F:05 Rollover Protection Disable Switch Circuit High Voltage/Open
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B008F:02 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B008F:02 code?
Need more information on how to fix the B008F:02 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B008F:02 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B008F:02 Code
1. What are common symptoms of OBDII code B008F:02 - Rollover Protection Disable Switch Circuit Short to Ground?
The common symptoms may include the airbag warning light illuminating on the dashboard and a message indicating an issue with the rollover protection system.
2. What can cause the Rollover Protection Disable Switch Circuit to short to ground?
A short to ground in the Rollover Protection Disable Switch Circuit can be caused by damaged wiring, a faulty rollover protection disable switch, or a problem with the control module.
3. How serious is the B008F:02 code related to the Rollover Protection Disable Switch Circuit Short to Ground?
This code is considered serious as it indicates a potential safety issue with the rollover protection system, which is designed to deploy airbags in the event of a rollover accident.
4. How can I diagnose the cause of OBDII code B008F:02?
Diagnosing this code typically involves using a scan tool to retrieve the specific fault code, checking the wiring and connections in the rollover protection system, and testing the rollover protection disable switch.
5. Can I still drive my vehicle with the B008F:02 fault code?
It is not recommended to drive the vehicle with this fault code present, as it indicates a potential safety issue with the rollover protection system that may affect its functionality in the event of an accident.
6. Is it possible to repair the Rollover Protection Disable Switch Circuit Short to Ground issue myself?
Repairing this issue may require advanced knowledge and diagnostic tools. It is recommended to consult a professional mechanic or dealership to properly diagnose and repair the problem.
7. How much does it typically cost to repair the Rollover Protection Disable Switch Circuit Short to Ground issue?
The cost of repairing this issue can vary depending on the underlying cause. It may involve replacing damaged wiring, the rollover protection disable switch, or the control module, which can range from a few hundred to a thousand dollars.
8. Can resetting the OBDII code B008F:02 make the problem go away temporarily?
Resetting the code may temporarily turn off the warning light, but it will not fix the underlying issue causing the fault code. It is important to diagnose and repair the problem to ensure the safety systems are functioning correctly.
9. Are there any safety risks associated with driving with the Rollover Protection Disable Switch Circuit Short to Ground fault code?
Driving with this fault code present may pose a safety risk, as the rollover protection system may not deploy airbags properly in the event of a rollover accident. It is best to address the issue promptly.
10. How long does it typically take to repair the Rollover Protection Disable Switch Circuit Short to Ground issue?
The repair time can vary depending on the exact cause of the fault. Simple fixes like repairing wiring may take a few hours, while more complex issues involving component replacement could take longer.
Discuss the causes and fixes for B008F:02 OBDII Code
Code B008F:02 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
