AutoCodes – GMC – B0088 2015 GMC Sierra

B0088 2015 GMC Sierra Code - Right Rear Side Impact Sensor

Quick Answer

The impact sensors are equipped on vehicles to supplement the supplemental inflatable restraint (SIR) system performance. Common causes include Faulty Right Rear Side Impact Sensor, Right Rear Side Impact Sensor harness is open or shorted, Right Rear Side Impact Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0088 2015 GMC Sierra indicates Right Rear Side Impact Sensor.
Common causes: Common causes include Faulty Right Rear Side Impact Sensor, Right Rear Side Impact Sensor harness is open or shorted, Right Rear Side Impact Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 266

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 24, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0088 2015 GMC Sierra Description

The impact sensors are equipped on vehicles to supplement the supplemental inflatable restraint (SIR) system performance. The impact sensors are electronic and are not part of the deployment loops, but instead provide inputs to the Inflatable Restraint Sensing and Diagnostic Module (SDM). The impact sensors can assist in determining the severity of some frontal and side collisions. The Inflatable Restraint Sensing and Diagnostic Module use the input from the impact sensors to assist in determining the severity of a collision, further supporting air bag deployment. If the Inflatable Restraint Sensing and Diagnostic Module determines a deployment is warranted, the Inflatable Restraint Sensing and Diagnostic Module will cause current to flow through the deployment loops deploying the air bags.

OBDII Code B0088 2015 GMC Sierra - Right Rear Side Impact Sensor - AutoCodes.com — B0088 2015 GMC Sierra Code - Right Rear Side Impact Sensor

What does this mean?

What are the Possible Causes of the DTC B0088 2015 GMC Sierra?

Faulty Right Rear Side Impact Sensor
Right Rear Side Impact Sensor harness is open or shorted
Right Rear Side Impact Sensor circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0088 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0088:02 Right Rear Side Impact Sensor Short to Ground
B0088:05 Right Rear Side Impact Sensor High Voltage/Open
B0088:39 Right Rear Side Impact Sensor Internal Malfunction
B0088:3A Right Rear Side Impact Sensor Incorrect Component Installed
B0088:71 Right Rear Side Impact Sensor Invalid Data

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0088 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0088 2015 GMC Sierra code?

Need more information on how to fix the B0088 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0088 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0088 2015 GMC Sierra Code

1. What does OBDII code B0088 for a 2015 GMC Sierra indicate?

Code B0088 specifically relates to the Right Rear Side Impact Sensor on a 2015 GMC Sierra.

2. What are common symptoms of a B0088 code in a 2015 GMC Sierra?

Common symptoms may include the airbag warning light illuminating on the dashboard and potential issues with the airbag system.

3. What could cause the B0088 code to trigger in a 2015 GMC Sierra?

The B0088 code often triggers due to a faulty right rear side impact sensor, wiring issues, or a problem with the airbag control module.

4. How can I diagnose the cause of a B0088 code in my 2015 GMC Sierra?

Diagnosing the B0088 code usually involves using a scan tool to retrieve the specific fault code, inspecting the right rear side impact sensor and its wiring for damage, and checking the airbag system components for any issues.

5. Can I continue driving my 2015 GMC Sierra with a B0088 code?

It is not recommended to drive the vehicle with an active B0088 code, as it indicates a potential problem with the airbag system, which could affect its functionality in the event of a collision.

6. Is it safe to repair a B0088 code in a 2015 GMC Sierra myself?

Repairing a B0088 code typically requires specialized knowledge and tools, so it is recommended to have a qualified mechanic or technician address the issue to ensure proper diagnosis and repair.

7. How much does it usually cost to repair a B0088 code in a 2015 GMC Sierra?

The cost of repairing a B0088 code can vary depending on the exact cause of the issue, but it may involve replacing the right rear side impact sensor, repairing damaged wiring, or addressing issues with the airbag control module.

8. Can a B0088 code be cleared/reset in a 2015 GMC Sierra?

After repairing the underlying issue causing the B0088 code, it can be cleared/reset using an OBDII scan tool to turn off the airbag warning light and ensure the system is functioning properly.

9. What are the potential risks of ignoring a B0088 code in a 2015 GMC Sierra?

Ignoring a B0088 code could lead to the airbag system not deploying correctly in the event of a side impact collision, potentially putting the vehicle occupants at greater risk of injury.

10. How often should I have the airbag system inspected in my 2015 GMC Sierra to prevent B0088 codes?

Regular inspections as part of routine maintenance and servicing are recommended to ensure the airbag system, including the side impact sensors, is functioning correctly and to prevent issues like the B0088 code from occurring.