AutoCodes – GMC – B0085 2014 GMC Sierra

B0085 2014 GMC Sierra Code - Left Front Side Impact Sensor

Quick Answer

The impact sensors are equipped on vehicles to supplement the supplemental inflatable restraint (SIR) system performance. Common causes include Faulty Left Front Side Impact Sensor, Left Front Side Impact Sensor harness is open or shorted, Left Front Side Impact Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0085 2014 GMC Sierra indicates Left Front Side Impact Sensor.
Common causes: Common causes include Faulty Left Front Side Impact Sensor, Left Front Side Impact Sensor harness is open or shorted, Left Front Side Impact Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 552

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 06, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0085 2014 GMC Sierra Description

The impact sensors are equipped on vehicles to supplement the supplemental inflatable restraint (SIR) system performance. The impact sensors are electronic and are not part of the deployment loops, but instead provide inputs to the Inflatable Restraint Sensing and Diagnostic Module (SDM). The impact sensors can assist in determining the severity of some frontal and side collisions. The Inflatable Restraint Sensing and Diagnostic Module use the input from the impact sensors to assist in determining the severity of a collision, further supporting air bag deployment. If the Inflatable Restraint Sensing and Diagnostic Module determines a deployment is warranted, the Inflatable Restraint Sensing and Diagnostic Module will cause current to flow through the deployment loops deploying the air bags.

OBDII Code B0085 2014 GMC Sierra - Left Front Side Impact Sensor - AutoCodes.com — B0085 2014 GMC Sierra Code - Left Front Side Impact Sensor

What does this mean?

What are the Possible Causes of the DTC B0085 2014 GMC Sierra?

Faulty Left Front Side Impact Sensor
Left Front Side Impact Sensor harness is open or shorted
Left Front Side Impact Sensor circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0085 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0085:02 Left Front Side Impact Sensor Short to Ground
B0085:05 Left Front Side Impact Sensor High Voltage/Open
B0085:0F Left Front Side Impact Sensor Signal Erratic
B0085:39 Left Front Side Impact Sensor Internal Malfunction
B0085:3A Left Front Side Impact Sensor Incorrect Component Installed
B0085:71 Left Front Side Impact Sensor Invalid Data

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0085 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0085 2014 GMC Sierra code?

Need more information on how to fix the B0085 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0085 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0085 2014 GMC Sierra Code

1. What does OBDII code B0085 for a 2014 GMC Sierra indicate?

Code B0085 for a 2014 GMC Sierra refers to a fault with the Left Front Side Impact Sensor.

2. What are the common symptoms of a Left Front Side Impact Sensor issue on a GMC Sierra?

Common symptoms include the airbag warning light illuminating on the dashboard, potential non-deployment of the airbag during a collision, and diagnostic trouble codes stored in the vehicle's computer.

3. What are the possible causes of OBDII code B0085 on a 2014 GMC Sierra?

Possible causes of code B0085 include a faulty Left Front Side Impact Sensor, damaged wiring or connectors, or issues with the airbag control module.

4. How can I diagnose a Left Front Side Impact Sensor problem on my 2014 GMC Sierra?

Diagnosing a Left Front Side Impact Sensor issue involves using a scan tool to retrieve the specific trouble code, inspecting the sensor and its wiring for damage, and checking for any loose connections.

5. Can I repair a Left Front Side Impact Sensor issue on my GMC Sierra myself?

While some basic diagnostics like checking connections and wiring can be done by DIY enthusiasts, replacing or recalibrating the sensor may require specialized tools and knowledge best handled by a professional mechanic.

6. Is it safe to drive with OBDII code B0085 present on my 2014 GMC Sierra?

It is not recommended to drive with an unresolved airbag sensor issue, as it may compromise the effectiveness of the airbag system in the event of a collision.

7. How much does it typically cost to repair a Left Front Side Impact Sensor on a 2014 GMC Sierra?

The cost of repairing a Left Front Side Impact Sensor can vary depending on the extent of the issue, but it may range from $200 to $500 including parts and labor.

8. Can resetting the OBDII code B0085 on my GMC Sierra make the problem go away?

Resetting the code may temporarily clear the warning light, but if the underlying issue with the Left Front Side Impact Sensor is not addressed, the code is likely to reappear.

9. Are there any recalls or technical service bulletins related to OBDII code B0085 on a 2014 GMC Sierra?

It's advisable to check with a GMC dealership or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any recalls or bulletins related to the Left Front Side Impact Sensor issue.

10. How important is it to address OBDII code B0085 for the Left Front Side Impact Sensor promptly?

Promptly addressing code B0085 is crucial for ensuring the proper functioning of the airbag system in your GMC Sierra, as a faulty sensor may lead to airbag non-deployment or improper deployment in a collision.