AutoCodes – GMC – B0084 2014 GMC Sierra

B0084 2014 GMC Sierra Code - Right Front Impact Sensor

Quick Answer

The impact sensors are equipped on vehicles to supplement the Supplemental Inflatable Restraint (SIR) system performance. Common causes include Faulty Right Front Impact Sensor, Right Front Impact Sensor harness is open or shorted, Right Front Impact Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0084 2014 GMC Sierra indicates Right Front Impact Sensor.
Common causes: Common causes include Faulty Right Front Impact Sensor, Right Front Impact Sensor harness is open or shorted, Right Front Impact Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 439

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 24, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0084 2014 GMC Sierra Description

The impact sensors are equipped on vehicles to supplement the Supplemental Inflatable Restraint (SIR) system performance. The impact sensors are electronic and are not part of the deployment loops, but instead provide inputs to the inflatable restraint sensing and diagnostic module. The impact sensors can assist in determining the severity of some frontal and side collisions. The Inflatable Restraint Sensing and Diagnostic Module (SDM) uses the input from the impact sensors to assist in determining the severity of a collision, further supporting air bag deployment. If the Inflatable Restraint Sensing and Diagnostic Module determines a deployment is warranted, the Inflatable Restraint Sensing and Diagnostic Module will cause current to flow through the deployment loops deploying the air bags.

OBDII Code B0084 2014 GMC Sierra - Right Front Impact Sensor - AutoCodes.com — B0084 2014 GMC Sierra Code - Right Front Impact Sensor

What does this mean?

What are the Possible Causes of the DTC B0084 2014 GMC Sierra?

Faulty Right Front Impact Sensor
Right Front Impact Sensor harness is open or shorted
Right Front Impact Sensor circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0084 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0084:02 Right Front Impact Sensor Short to Ground
B0084:05 Right Front Impact Sensor Short to Battery or Open
B0084:08 Right Front Impact Sensor Signal Invalid
B0084:0F Right Front Impact Sensor Erratic
B0084:39 Right Front Impact Sensor Internal Electronic Failure
B0084:3A Right Front Impact Sensor Incorrect Component Installed
B0084:71 Right Front Impact Sensor Invalid Serial Data Received

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0084 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0084 2014 GMC Sierra code?

Need more information on how to fix the B0084 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0084 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0084 2014 GMC Sierra Code

1. What does OBDII code B0084 for a 2014 GMC Sierra indicate?

- OBDII code B0084 in a 2014 GMC Sierra refers to a problem with the Right Front Impact Sensor.

2. What are the common symptoms of a Right Front Impact Sensor issue (B0084) in a 2014 GMC Sierra?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the right front airbag during a collision.

3. What are the possible causes of OBDII code B0084 in a 2014 GMC Sierra?

- The code B0084 can be triggered by a faulty Right Front Impact Sensor, damaged wiring or connectors, or issues with the airbag control module.

4. How can I diagnose a Right Front Impact Sensor issue (B0084) in my 2014 GMC Sierra?

- Diagnosing the problem may involve using a scan tool to retrieve the specific trouble code, inspecting the sensor and related wiring for damage, and testing the sensor's functionality.

5. Can I continue driving my 2014 GMC Sierra with OBDII code B0084?

- It is not recommended to drive the vehicle with an active B0084 code, as it indicates a potential problem with the airbag system's ability to deploy in the event of a collision.

6. How can I repair a Right Front Impact Sensor problem (B0084) in a 2014 GMC Sierra?

- Repairing the issue may involve replacing the faulty Right Front Impact Sensor, repairing damaged wiring or connectors, or addressing any issues with the airbag control module.

7. Is it safe to reset the OBDII code B0084 in my 2014 GMC Sierra without fixing the underlying issue?

- It is not recommended to simply reset the code without addressing the root cause, as it may compromise the safety of the airbag system in the vehicle.

8. Can a DIY enthusiast fix the Right Front Impact Sensor problem (B0084) in a 2014 GMC Sierra?

- While some basic troubleshooting steps can be performed by DIY enthusiasts, repairing or replacing the Right Front Impact Sensor may require specialized tools and expertise best handled by a professional mechanic.

9. How much does it typically cost to repair a Right Front Impact Sensor issue (B0084) in a 2014 GMC Sierra?

- The cost of repairing a B0084 code can vary depending on the specific cause of the issue, but it may involve expenses for parts, labor, and diagnostic services.

10. Are there any recalls or technical service bulletins related to OBDII code B0084 in a 2014 GMC Sierra?

- It is recommended to check with a GMC dealership or online resources for any recalls or technical service bulletins related to the B0084 code to see if there are known issues or remedies provided by the manufacturer.