AutoCodes – Chevrolet – B0083 2017 Chevrolet Silverado

B0083 2017 Chevrolet Silverado Code - Left Front Impact Sensor

Quick Answer

The impact sensors are equipped on vehicles to supplement the Supplemental Inflatable Restraint (SIR) system performance. Common causes include Faulty Left Front Impact Sensor, Left Front Impact Sensor harness is open or shorted, Left Front Impact Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0083 2017 Chevrolet Silverado indicates Left Front Impact Sensor.
Common causes: Common causes include Faulty Left Front Impact Sensor, Left Front Impact Sensor harness is open or shorted, Left Front Impact Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 632

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 23, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0083 2017 Chevrolet Silverado Description

The impact sensors are equipped on vehicles to supplement the Supplemental Inflatable Restraint (SIR) system performance. The impact sensors are electronic and are not part of the deployment loops, but instead provide inputs to the inflatable restraint sensing and diagnostic module. The impact sensors can assist in determining the severity of some frontal and side collisions. The Inflatable Restraint Sensing and Diagnostic Module (SDM) uses the input from the impact sensors to assist in determining the severity of a collision, further supporting air bag deployment. If the Inflatable Restraint Sensing and Diagnostic Module determines a deployment is warranted, the Inflatable Restraint Sensing and Diagnostic Module will cause current to flow through the deployment loops deploying the air bags.

OBDII Code B0083 2017 Chevrolet Silverado - Left Front Impact Sensor - AutoCodes.com — B0083 2017 Chevrolet Silverado Code - Left Front Impact Sensor

What does this mean?

What are the Possible Causes of the DTC B0083 2017 Chevrolet Silverado?

Faulty Left Front Impact Sensor
Left Front Impact Sensor harness is open or shorted
Left Front Impact Sensor circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0083 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0083:02 Left Front Impact Sensor Short to Ground
B0083:05 Left Front Impact Sensor Short to Battery or Open
B0083:08 Left Front Impact Sensor Signal Invalid
B0083:0F Left Front Impact Sensor Erratic
B0083:39 Left Front Impact Sensor Internal Electronic Failure
B0083:3A Left Front Impact Sensor Incorrect Component Installed
B0083:71 Left Front Impact Sensor Invalid Serial Data Received

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0083 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0083 2017 Chevrolet Silverado code?

Need more information on how to fix the B0083 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0083 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0083 2017 Chevrolet Silverado Code

1. What does the OBDII code B0083 on a 2017 Chevrolet Silverado indicate?

The code B0083 for a 2017 Chevrolet Silverado specifically relates to the Left Front Impact Sensor.

2. What are the common symptoms of a Left Front Impact Sensor issue triggering the B0083 code?

Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the airbag system's deployment in the event of a collision.

3. What are some possible causes of the B0083 code on a 2017 Chevrolet Silverado?

Potential causes of the B0083 code include a faulty left front impact sensor, damaged wiring or connectors related to the sensor, or a problem with the airbag control module.

4. How can I diagnose a Left Front Impact Sensor issue triggering the B0083 code on my 2017 Chevrolet Silverado?

Diagnosis typically involves using a scan tool to retrieve the specific trouble code, inspecting the left front impact sensor and its wiring for damage, and testing the sensor's functionality.

5. Can I continue driving my 2017 Chevrolet Silverado with the B0083 code present?

It is not recommended to drive the vehicle with the B0083 code active, as it may affect the proper functioning of the airbag system in the event of a collision.

6. Is it possible to reset the B0083 code on a 2017 Chevrolet Silverado without addressing the underlying issue?

While you can clear the code temporarily, it will likely reappear until the root cause of the Left Front Impact Sensor problem is identified and resolved.

7. How much does it typically cost to repair a Left Front Impact Sensor issue triggering the B0083 code?

The cost of repair can vary depending on the specific cause of the issue, but it may involve replacing the left front impact sensor, repairing damaged wiring, or addressing issues with the airbag control module.

8. Can I fix a B0083 code on a 2017 Chevrolet Silverado myself, or should I seek professional help?

If you have experience working with automotive electrical systems and airbag components, you may attempt to diagnose and repair the issue yourself. However, if you are unsure or uncomfortable, it is best to seek professional help to ensure proper repairs and safety.

9. Are there any safety implications associated with a Left Front Impact Sensor issue triggering the B0083 code?

Yes, a malfunctioning left front impact sensor can affect the proper deployment of the airbag system in the event of a collision, potentially compromising occupant safety.

10. How urgently should I address a B0083 code on my 2017 Chevrolet Silverado?

It is recommended to address the B0083 code promptly to ensure the proper functioning of the airbag system and maintain occupant safety while driving.