AutoCodes – GMC – B0083 2015 GMC Sierra

B0083 2015 GMC Sierra Code - Left Front Impact Sensor

Quick Answer

The impact sensors are equipped on vehicles to supplement the Supplemental Inflatable Restraint (SIR) system performance. Common causes include Faulty Left Front Impact Sensor, Left Front Impact Sensor harness is open or shorted, Left Front Impact Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0083 2015 GMC Sierra indicates Left Front Impact Sensor.
Common causes: Common causes include Faulty Left Front Impact Sensor, Left Front Impact Sensor harness is open or shorted, Left Front Impact Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 333

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 23, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0083 2015 GMC Sierra Description

The impact sensors are equipped on vehicles to supplement the Supplemental Inflatable Restraint (SIR) system performance. The impact sensors are electronic and are not part of the deployment loops, but instead provide inputs to the inflatable restraint sensing and diagnostic module. The impact sensors can assist in determining the severity of some frontal and side collisions. The Inflatable Restraint Sensing and Diagnostic Module (SDM) uses the input from the impact sensors to assist in determining the severity of a collision, further supporting air bag deployment. If the Inflatable Restraint Sensing and Diagnostic Module determines a deployment is warranted, the Inflatable Restraint Sensing and Diagnostic Module will cause current to flow through the deployment loops deploying the air bags.

OBDII Code B0083 2015 GMC Sierra - Left Front Impact Sensor - AutoCodes.com — B0083 2015 GMC Sierra Code - Left Front Impact Sensor

What does this mean?

What are the Possible Causes of the DTC B0083 2015 GMC Sierra?

Faulty Left Front Impact Sensor
Left Front Impact Sensor harness is open or shorted
Left Front Impact Sensor circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0083 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0083:02 Left Front Impact Sensor Short to Ground
B0083:05 Left Front Impact Sensor Short to Battery or Open
B0083:08 Left Front Impact Sensor Signal Invalid
B0083:0F Left Front Impact Sensor Erratic
B0083:39 Left Front Impact Sensor Internal Electronic Failure
B0083:3A Left Front Impact Sensor Incorrect Component Installed
B0083:71 Left Front Impact Sensor Invalid Serial Data Received

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0083 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0083 2015 GMC Sierra code?

Need more information on how to fix the B0083 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0083 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0083 2015 GMC Sierra Code

1. What does OBDII code B0083 for a 2015 GMC Sierra indicate?

The B0083 code specifically relates to the Left Front Impact Sensor in a 2015 GMC Sierra.

2. What are the common symptoms of a Left Front Impact Sensor issue triggering code B0083?

Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the airbag system functioning properly.

3. What are the possible causes of OBDII code B0083 in a 2015 GMC Sierra?

Potential causes of the B0083 code include a faulty left front impact sensor, wiring issues, or a problem with the airbag control module.

4. How can I diagnose a Left Front Impact Sensor problem triggering code B0083 in my 2015 GMC Sierra?

Diagnosis typically involves using a scan tool to read the OBDII codes, inspecting the left front impact sensor and its wiring for damage, and checking connections for proper continuity.

5. Can I still drive my 2015 GMC Sierra with OBDII code B0083 present?

It is not recommended to drive a vehicle with an unresolved airbag system issue, as it may compromise occupant safety in the event of a collision.

6. What is the typical repair process for fixing OBDII code B0083 related to the Left Front Impact Sensor in a 2015 GMC Sierra?

Repair usually involves replacing the faulty left front impact sensor, addressing any wiring issues, and clearing the code with a scan tool.

7. Are there any DIY tips for addressing OBDII code B0083 in my 2015 GMC Sierra?

While some basic troubleshooting like checking connections and wiring can be done DIY, it's recommended to have a professional diagnose and repair the issue to ensure proper functioning of the airbag system.

8. How much does it cost to repair OBDII code B0083 related to the Left Front Impact Sensor in a 2015 GMC Sierra?

The cost of repair can vary depending on the exact cause of the issue, but it typically ranges from $200 to $500 for parts and labor.

9. Is the Left Front Impact Sensor a critical component for the airbag system in a 2015 GMC Sierra?

Yes, the left front impact sensor is a crucial component that helps the airbag system deploy effectively in the event of a collision, making it essential for occupant safety.

10. Can OBDII code B0083 in a 2015 GMC Sierra be reset without fixing the underlying issue?

Resetting the code without addressing the root cause, such as a faulty left front impact sensor, may temporarily turn off the warning light but will not resolve the potential safety issue with the airbag system.