AutoCodes – GMC – B0081 2018 GMC Sierra

B0081 2018 GMC Sierra Code - Passenger Presence Module Malfunction

Quick Answer

When the ignition is turned ON, the Passenger Presence Module and the Inflatable Restraint Sensing and Diagnostic Module perform tests to diagnose critical malfunctions within itself. Common causes include Faulty Passenger Presence Module, Passenger Presence Module harness is open or shorted, Passenger Presence Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0081 2018 GMC Sierra indicates Passenger Presence Module Malfunction.
Common causes: Common causes include Faulty Passenger Presence Module, Passenger Presence Module harness is open or shorted, Passenger Presence Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 317

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 18, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0081 2018 GMC Sierra Description

When the ignition is turned ON, the Passenger Presence Module and the Inflatable Restraint Sensing and Diagnostic Module perform tests to diagnose critical malfunctions within itself. When the Inflatable Restraint Sensing and Diagnostic Module has completed the power-up mode, the Inflatable Restraint Sensing and Diagnostic Module will establish communication with the Passenger Presence Module. The Inflatable Restraint Sensing and Diagnostic Module will also request the instrument panel cluster to illuminate both of the PASSENGER AIR BAG ON/OFF indicators for 5 seconds. If the Inflatable Restraint Sensing and Diagnostic Module detect that the Passenger Presence Module has set a current Diagnostic Trouble Code (DTC), the Inflatable Restraint Sensing and Diagnostic Module will then disable the passenger instrument panel air bag deployment loop, set DTC B0081, and illuminate the AIR BAG indicator. The DTC will be set when the Inflatable Restraint Sensing and Diagnostic Module has a general fault present.

OBDII Code B0081 2018 GMC Sierra - Passenger Presence Module Malfunction - AutoCodes.com — B0081 2018 GMC Sierra Code - Passenger Presence Module Malfunction

What does this mean?

What are the Possible Causes of the DTC B0081 2018 GMC Sierra?

Faulty Passenger Presence Module
Passenger Presence Module harness is open or shorted
Passenger Presence Module circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0081 2018 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0081:00 Passenger Presence Module Malfunction (sets in the Inflatable Restraint Sensing and Diagnostic Module)
B0081:11 Passenger Presence Module Above Threshold (Build Check Failure) (sets in the Passenger Presence Module)
B0081:3A Passenger Presence Module Incorrect Component Installed (sets in the Inflatable Restraint Sensing and Diagnostic Module)
B0081:4B Passenger Presence Module Calibration Not Learned (sets in the Passenger Presence Module)
B0081:5A Passenger Presence Module Plausibility Failure (sets in the Passenger Presence Module)
B0081:71 Passenger Presence Module Invalid Serial Data Received (sets in Inflatable Restraint Sensing and Diagnostic Module)

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0081 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0081 2018 GMC Sierra code?

Need more information on how to fix the B0081 2018 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0081 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0081 2018 GMC Sierra Code

1. What are the common symptoms of OBDII code B0081 in a 2018 GMC Sierra?

The common symptoms of OBDII code B0081 in a 2018 GMC Sierra include the airbag warning light illuminating on the dashboard and a message indicating "Service Airbag System."

2. What does the OBDII code B0081 indicate in a 2018 GMC Sierra?

OBDII code B0081 in a 2018 GMC Sierra indicates a malfunction in the Passenger Presence Module, which is a crucial component of the vehicle's airbag system.

3. What are the possible causes of the Passenger Presence Module malfunction in a 2018 GMC Sierra?

The possible causes of the Passenger Presence Module malfunction in a 2018 GMC Sierra may include a faulty sensor, wiring issues, connector problems, or a failed Passenger Presence Module itself.

4. How can I diagnose the Passenger Presence Module issue related to OBDII code B0081 in a 2018 GMC Sierra?

Diagnosing the Passenger Presence Module issue related to OBDII code B0081 in a 2018 GMC Sierra typically involves using a diagnostic scanner to read the code, checking the wiring and connections, and testing the Passenger Presence Module itself.

5. Can I repair the Passenger Presence Module issue causing OBDII code B0081 in a 2018 GMC Sierra on my own?

Repairing the Passenger Presence Module issue causing OBDII code B0081 in a 2018 GMC Sierra may require advanced automotive knowledge and specialized tools. It is recommended to consult a professional mechanic for proper diagnosis and repair.

6. Is it safe to drive a 2018 GMC Sierra with the OBDII code B0081 related to the Passenger Presence Module issue?

It is not recommended to drive a 2018 GMC Sierra with the OBDII code B0081 related to the Passenger Presence Module issue, as it may compromise the proper functioning of the airbag system, which is crucial for occupant safety in case of a collision.

7. How much does it cost to repair the Passenger Presence Module issue causing OBDII code B0081 in a 2018 GMC Sierra?

The cost of repairing the Passenger Presence Module issue causing OBDII code B0081 in a 2018 GMC Sierra can vary depending on the exact cause of the malfunction, the required parts, and labor costs. It is advisable to get a professional estimate for an accurate cost assessment.

8. Can resetting the OBDII system clear the B0081 code in a 2018 GMC Sierra?

Resetting the OBDII system may temporarily clear the B0081 code related to the Passenger Presence Module issue in a 2018 GMC Sierra, but if the underlying problem is not addressed, the code is likely to reappear. It is essential to diagnose and fix the root cause of the issue.