AutoCodes – Hummer – B0080 Hummer

B0080 Hummer Code - Passenger Seat Position Sensor Circuit

Quick Answer

The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0080 Hummer indicates Passenger Seat Position Sensor Circuit.
Common causes: Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,948

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 17, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0080 Hummer Description

The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. There are two states of seat position, forward and rearward. The seat position sensor interfaces with the Inflatable Restraint Sensing and Diagnostic Module (SDM) and allows the inflatable restraint sensing and diagnostic module to disable stage 2 of the air bag for a front seat that is forward of the forward/rearward point in seat track. The seat position sensor provides two current ranges, one range for the forward seat position and one for the rearward seat position. When the Inflatable Restraint Sensing and Diagnostic Module receives input from a seat position sensor that the seat is rearward, and the inflatable restraint sensing and diagnostic module will not disable stage 2 deployment. When the seat is forward, the Inflatable Restraint Sensing and Diagnostic Module will disable stage 2 deployment. The inflatable restraint sensing and diagnostic module monitors the seat position sensor circuit and if a fault is detected, the Inflatable Restraint Sensing and Diagnostic Module will set Diagnostic Trouble Code (DTC) B0080 and disable stage 2 frontal deployment.

OBDII Code B0080 Hummer - Passenger Seat Position Sensor Circuit - AutoCodes.com — B0080 Hummer Code - Passenger Seat Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC B0080 Hummer?

Faulty Passenger Seat Position Sensor
Passenger Seat Position Sensor harness is open or shorted
Passenger Seat Position Sensor circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0080 Hummer?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0080:01 Passenger Seat Position Sensor Circuit Short to Battery
B0080:02 Passenger Seat Position Sensor Circuit Short to Ground
B0080:04 Passenger Seat Position Sensor Circuit Open
B0080:05 Passenger Seat Position Sensor Circuit High Voltage or Open
B0080:06 Passenger Seat Position Sensor Circuit Low Voltage or Open
B0080:08 Passenger Seat Position Sensor Circuit Performance-Signal Invalid
B0080:0C Passenger Seat Position Sensor Circuit Low Current

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0080 Hummer code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0080 Hummer code?

Need more information on how to fix the B0080 Hummer code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0080 Hummer code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0080 Hummer Code

1. What are the common symptoms of OBDII code B0080 in a Hummer related to the Passenger Seat Position Sensor Circuit?

The common symptoms include the airbag warning light illuminating on the dashboard, the passenger airbag not deploying in a collision, and potential issues with the seatbelt pre-tensioners.

2. What are the possible causes of OBDII code B0080 in a Hummer?

The code B0080 typically indicates a fault in the passenger seat position sensor circuit. Common causes include a faulty sensor, damaged wiring or connectors, or issues with the airbag control module.

3. How can I diagnose the issue related to OBDII code B0080 in my Hummer?

Diagnosis usually involves using a scan tool to retrieve the specific fault code and then inspecting the passenger seat position sensor, wiring, and connectors for any visible damage or loose connections.

4. Can I repair OBDII code B0080 in my Hummer by myself?

Depending on your mechanical skills and access to tools, you may be able to repair the issue yourself. Simple fixes could include checking and repairing any damaged wiring or connectors, or replacing the faulty sensor.

5. Is it safe to drive my Hummer with OBDII code B0080 present?

It is not recommended to drive the vehicle with an active airbag fault code like B0080, as it may result in the passenger airbag not deploying properly in the event of a collision. It is best to address the issue promptly.

6. Do I need to replace the entire passenger seat if I have OBDII code B0080 in my Hummer?

In most cases, you do not need to replace the entire seat. The issue is usually related to the sensor or wiring, which can be repaired or replaced separately.

7. How much does it typically cost to repair OBDII code B0080 in a Hummer?

The cost of repairing OBDII code B0080 can vary depending on the root cause of the issue, the extent of the repairs needed, and whether you choose to do it yourself or take it to a professional. Costs could range from a few dollars for simple fixes to a few hundred dollars for more complex repairs.

8. Will resetting the OBDII code B0080 in my Hummer make the issue go away?

Resetting the code may temporarily turn off the warning light, but it will not fix the underlying issue causing the fault code. It is important to diagnose and repair the problem to ensure the proper functioning of the airbag system.

9. Can a mechanic easily fix OBDII code B0080 in a Hummer?

A qualified mechanic should be able to diagnose and repair OBDII code B0080 efficiently, as they have the necessary tools and expertise to address airbag system issues safely and effectively.

10. How long does it take to repair OBDII code B0080 in a Hummer?

The repair time can vary depending on the specific cause of the issue and the complexity of the repairs needed. Simple fixes may take just a short amount of time, while more involved repairs could require several hours or even a day to complete.