AutoCodes – Chevrolet – B0080 2016 Chevrolet Silverado

B0080 2016 Chevrolet Silverado Code - Passenger Seat Position Sensor Circuit

Quick Answer

The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0080 2016 Chevrolet Silverado indicates Passenger Seat Position Sensor Circuit.
Common causes: Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 489

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 17, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0080 2016 Chevrolet Silverado Description

The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. There are two states of seat position, forward and rearward. The seat position sensor interfaces with the Inflatable Restraint Sensing and Diagnostic Module (SDM) and allows the inflatable restraint sensing and diagnostic module to disable stage 2 of the air bag for a front seat that is forward of the forward/rearward point in seat track. The seat position sensor provides two current ranges, one range for the forward seat position and one for the rearward seat position. When the Inflatable Restraint Sensing and Diagnostic Module receives input from a seat position sensor that the seat is rearward, and the inflatable restraint sensing and diagnostic module will not disable stage 2 deployment. When the seat is forward, the Inflatable Restraint Sensing and Diagnostic Module will disable stage 2 deployment. The inflatable restraint sensing and diagnostic module monitors the seat position sensor circuit and if a fault is detected, the Inflatable Restraint Sensing and Diagnostic Module will set Diagnostic Trouble Code (DTC) B0080 and disable stage 2 frontal deployment.

OBDII Code B0080 2016 Chevrolet Silverado - Passenger Seat Position Sensor Circuit - AutoCodes.com — B0080 2016 Chevrolet Silverado Code - Passenger Seat Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC B0080 2016 Chevrolet Silverado?

Faulty Passenger Seat Position Sensor
Passenger Seat Position Sensor harness is open or shorted
Passenger Seat Position Sensor circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0080 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0080:01 Passenger Seat Position Sensor Circuit Short to Battery
B0080:02 Passenger Seat Position Sensor Circuit Short to Ground
B0080:04 Passenger Seat Position Sensor Circuit Open
B0080:05 Passenger Seat Position Sensor Circuit High Voltage or Open
B0080:06 Passenger Seat Position Sensor Circuit Low Voltage or Open
B0080:08 Passenger Seat Position Sensor Circuit Performance-Signal Invalid
B0080:0C Passenger Seat Position Sensor Circuit Low Current

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0080 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0080 2016 Chevrolet Silverado code?

Need more information on how to fix the B0080 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0080 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0080 2016 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code B0080 in a 2016 Chevrolet Silverado?

- The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the passenger seatbelt reminder system.

2. What does the OBDII code B0080 indicate in a 2016 Chevrolet Silverado?

- OBDII code B0080 indicates a fault in the passenger seat position sensor circuit of the airbag system.

3. What are the possible causes of OBDII code B0080 in a 2016 Chevrolet Silverado?

- The possible causes include a faulty passenger seat position sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning airbag control module.

4. How can I diagnose the OBDII code B0080 in my 2016 Chevrolet Silverado?

- Diagnosis typically involves using a scan tool to retrieve the specific trouble code, inspecting the passenger seat position sensor and related wiring for damage, and testing the components for proper functionality.

5. Can I continue to drive my 2016 Chevrolet Silverado with OBDII code B0080?

- It is not recommended to drive the vehicle with an active airbag system fault, as this can compromise the safety of the passengers in the event of a collision.

6. What are some repair tips for fixing OBDII code B0080 in a 2016 Chevrolet Silverado?

- Repair tips may include checking and repairing any damaged wiring or connectors, replacing the faulty passenger seat position sensor, or reprogramming the airbag control module if necessary.

7. Is it possible to reset the OBDII code B0080 in a 2016 Chevrolet Silverado without fixing the underlying issue?

- While you can clear the code temporarily, it will likely reappear until the root cause of the fault in the passenger seat position sensor circuit is addressed.

8. How much does it typically cost to repair OBDII code B0080 in a 2016 Chevrolet Silverado?

- The cost of repair can vary depending on the specific cause of the issue, but it may involve parts and labor expenses for sensor replacement, wiring repairs, or module reprogramming.

9. Can I repair the passenger seat position sensor circuit issue causing OBDII code B0080 in my 2016 Chevrolet Silverado myself?

- While some DIY enthusiasts may attempt to diagnose and repair the issue themselves, it is recommended to seek professional assistance for accurate diagnosis and proper repair to ensure the airbag system's safety and functionality.

10. How important is it to address OBDII code B0080 promptly in a 2016 Chevrolet Silverado?

- It is crucial to address OBDII code B0080 promptly, as any fault in the airbag system can compromise the vehicle's safety in the event of a collision.