B0080 2014 GMC Sierra Code - Passenger Seat Position Sensor Circuit
Quick Answer
The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0080 2014 GMC Sierra indicates Passenger Seat Position Sensor Circuit.
- Common causes
- Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0080 2014 GMC Sierra Description
What are the Possible Causes of the DTC B0080 2014 GMC Sierra?
- Faulty Passenger Seat Position Sensor
- Passenger Seat Position Sensor harness is open or shorted
- Passenger Seat Position Sensor circuit poor electrical connection
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
How to Fix the DTC B0080 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0080:02 Passenger Seat Position Sensor Circuit Short to Ground
B0080:04 Passenger Seat Position Sensor Circuit Open
B0080:05 Passenger Seat Position Sensor Circuit High Voltage or Open
B0080:06 Passenger Seat Position Sensor Circuit Low Voltage or Open
B0080:08 Passenger Seat Position Sensor Circuit Performance-Signal Invalid
B0080:0C Passenger Seat Position Sensor Circuit Low Current
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0080 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0080 2014 GMC Sierra code?
Need more information on how to fix the B0080 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0080 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0080 2014 GMC Sierra Code
1. What are common symptoms of OBDII code B0080 on a 2014 GMC Sierra related to the Passenger Seat Position Sensor Circuit?
The common symptoms include the airbag warning light staying illuminated on the dashboard and the passenger airbag system being disabled.
2. What are possible causes of the B0080 OBDII code in a 2014 GMC Sierra?
Possible causes include a faulty passenger seat position sensor, damaged wiring or connectors in the seat sensor circuit, or a malfunctioning airbag control module.
3. How can I diagnose the B0080 OBDII code on my 2014 GMC Sierra?
Diagnosis typically involves using a scan tool to retrieve the specific fault code, checking the passenger seat position sensor for proper operation, inspecting the wiring and connectors for damage, and testing the airbag control module.
4. Can I still drive my 2014 GMC Sierra with the B0080 OBDII code present?
It is not recommended to drive the vehicle with the B0080 code active, as it indicates a potential issue with the passenger airbag system, which could affect its proper function in a crash.
5. How can I reset the B0080 OBDII code on my 2014 GMC Sierra?
Resetting the code typically involves using a scan tool to clear the code after the underlying issue with the passenger seat position sensor circuit has been diagnosed and repaired.
6. Is it safe to repair the B0080 OBDII code on my 2014 GMC Sierra myself?
While some DIY enthusiasts may attempt to diagnose and repair the issue themselves, it is recommended to consult a professional mechanic or dealership due to the critical nature of the passenger airbag system.
7. What are some tips for repairing the B0080 OBDII code on a 2014 GMC Sierra?
Tips include carefully inspecting the wiring and connectors for any damage, ensuring all connections are secure, and following the manufacturer's repair procedures outlined in the service manual.
8. How much does it typically cost to repair the B0080 OBDII code on a 2014 GMC Sierra?
The cost of repairs can vary depending on the specific issue causing the code, but it may involve replacing the passenger seat position sensor, repairing damaged wiring, or reprogramming the airbag control module.
9. Can the B0080 OBDII code on a 2014 GMC Sierra come back after being repaired?
If the underlying issue causing the code is not properly addressed, the code may reappear after being cleared. It is important to ensure the repair is done correctly to prevent this.
10. Will the B0080 OBDII code on my 2014 GMC Sierra cause the airbags to not deploy in a crash?
If the code is related to a fault in the passenger seat position sensor circuit, it may affect the deployment of the passenger airbag in a crash, which is why it is important to address the issue promptly.
Discuss the causes and fixes for B0080 2014 GMC Sierra OBDII Code
Code B0080 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
