AutoCodes – Chevrolet – B0080 2014 Chevrolet Silverado

B0080 2014 Chevrolet Silverado Code - Passenger Seat Position Sensor Circuit

Quick Answer

The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0080 2014 Chevrolet Silverado indicates Passenger Seat Position Sensor Circuit.
Common causes: Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 669

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 17, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0080 2014 Chevrolet Silverado Description

The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. There are two states of seat position, forward and rearward. The seat position sensor interfaces with the Inflatable Restraint Sensing and Diagnostic Module (SDM) and allows the inflatable restraint sensing and diagnostic module to disable stage 2 of the air bag for a front seat that is forward of the forward/rearward point in seat track. The seat position sensor provides two current ranges, one range for the forward seat position and one for the rearward seat position. When the Inflatable Restraint Sensing and Diagnostic Module receives input from a seat position sensor that the seat is rearward, and the inflatable restraint sensing and diagnostic module will not disable stage 2 deployment. When the seat is forward, the Inflatable Restraint Sensing and Diagnostic Module will disable stage 2 deployment. The inflatable restraint sensing and diagnostic module monitors the seat position sensor circuit and if a fault is detected, the Inflatable Restraint Sensing and Diagnostic Module will set Diagnostic Trouble Code (DTC) B0080 and disable stage 2 frontal deployment.

OBDII Code B0080 2014 Chevrolet Silverado - Passenger Seat Position Sensor Circuit - AutoCodes.com — B0080 2014 Chevrolet Silverado Code - Passenger Seat Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC B0080 2014 Chevrolet Silverado?

Faulty Passenger Seat Position Sensor
Passenger Seat Position Sensor harness is open or shorted
Passenger Seat Position Sensor circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0080 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0080:01 Passenger Seat Position Sensor Circuit Short to Battery
B0080:02 Passenger Seat Position Sensor Circuit Short to Ground
B0080:04 Passenger Seat Position Sensor Circuit Open
B0080:05 Passenger Seat Position Sensor Circuit High Voltage or Open
B0080:06 Passenger Seat Position Sensor Circuit Low Voltage or Open
B0080:08 Passenger Seat Position Sensor Circuit Performance-Signal Invalid
B0080:0C Passenger Seat Position Sensor Circuit Low Current

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0080 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0080 2014 Chevrolet Silverado code?

Need more information on how to fix the B0080 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0080 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0080 2014 Chevrolet Silverado Code

1. What are common symptoms of OBDII code B0080 in a 2014 Chevrolet Silverado?

The common symptoms of OBDII code B0080 include the airbag warning light illuminated on the dashboard and potential issues with the passenger seat belt reminder system.

2. What does the OBDII code B0080 indicate in a 2014 Chevrolet Silverado?

OBDII code B0080 in a 2014 Chevrolet Silverado indicates a problem with the passenger seat position sensor circuit, typically related to the seat occupancy detection system.

3. What are possible causes of OBDII code B0080 in a 2014 Chevrolet Silverado?

Possible causes of OBDII code B0080 in a 2014 Chevrolet Silverado include a faulty passenger seat position sensor, wiring issues, loose connections, or a malfunctioning airbag control module.

4. How can I diagnose the OBDII code B0080 in my 2014 Chevrolet Silverado?

Diagnosing OBDII code B0080 involves using a diagnostic scanner to retrieve the specific fault code, inspecting the passenger seat position sensor and related wiring for damage or loose connections, and testing the sensor's functionality.

5. Can I drive my 2014 Chevrolet Silverado with OBDII code B0080?

It is not recommended to drive your 2014 Chevrolet Silverado with OBDII code B0080 present, as it indicates a potential issue with the passenger seat occupancy detection system, which is essential for airbag deployment in case of an accident.

6. How can I reset OBDII code B0080 in my 2014 Chevrolet Silverado?

Resetting OBDII code B0080 in a 2014 Chevrolet Silverado can be done using a diagnostic scanner to clear the code after addressing the underlying issue with the passenger seat position sensor circuit.

7. Is it safe to repair OBDII code B0080 in my 2014 Chevrolet Silverado myself?

While some DIY enthusiasts may attempt to repair OBDII code B0080 themselves by checking connections and replacing components, it is recommended to consult a professional mechanic for proper diagnosis and repair to ensure the airbag system's safety.

8. How much does it cost to repair OBDII code B0080 in a 2014 Chevrolet Silverado?

The cost of repairing OBDII code B0080 in a 2014 Chevrolet Silverado can vary depending on the root cause of the issue, the extent of the repair needed, and labor rates in your area. It is advisable to obtain quotes from different repair shops for an accurate estimate.

9. Can OBDII code B0080 in a 2014 Chevrolet Silverado cause the airbags to deploy unexpectedly?

OBDII code B0080 itself does not cause the airbags to deploy unexpectedly, but it indicates a potential issue with the passenger seat position sensor circuit that could affect the airbag system's proper functioning in the event of a collision.

10. Will disconnecting the battery reset OBDII code B0080 in my 2014 Chevrolet Silverado?

Disconnecting the battery may temporarily clear OBDII code B0080, but if the underlying issue with the passenger seat position sensor circuit is not addressed, the code is likely to reappear once the vehicle is driven and the system detects the fault again.