AutoCodes – Generic – B0080:06

B0080:06 Code - Passenger Seat Position Sensor Circuit Low Voltage or Open

Quick Answer

The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0080:06 indicates Passenger Seat Position Sensor Circuit Low Voltage or Open.
Common causes: Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 887

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 17, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0080:06 Description

The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. There are two states of seat position, forward and rearward. The seat position sensor interfaces with the Inflatable Restraint Sensing and Diagnostic Module (SDM) and allows the inflatable restraint sensing and diagnostic module to disable stage 2 of the air bag for a front seat that is forward of the forward/rearward point in seat track. The seat position sensor provides two current ranges, one range for the forward seat position and one for the rearward seat position. When the Inflatable Restraint Sensing and Diagnostic Module receives input from a seat position sensor that the seat is rearward, and the inflatable restraint sensing and diagnostic module will not disable stage 2 deployment. When the seat is forward, the Inflatable Restraint Sensing and Diagnostic Module will disable stage 2 deployment. The inflatable restraint sensing and diagnostic module monitors the seat position sensor circuit and if a fault is detected, the Inflatable Restraint Sensing and Diagnostic Module will set Diagnostic Trouble Code (DTC) B0080 and disable stage 2 frontal deployment. The DTC will be set when the Inflatable Restraint Sensing and Diagnostic Module detects the seat position sensor signal circuit is shorted to ground or an open for 2 s.

OBDII Code B0080:06 - Passenger Seat Position Sensor Circuit Low Voltage or Open - AutoCodes.com — B0080:06 Code - Passenger Seat Position Sensor Circuit Low Voltage or Open

What does this mean?

What are the Possible Causes of the DTC B0080:06?

Faulty Passenger Seat Position Sensor
Passenger Seat Position Sensor harness is open or shorted
Passenger Seat Position Sensor circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0080:06?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0080:01 Passenger Seat Position Sensor Circuit Short to Battery
B0080:02 Passenger Seat Position Sensor Circuit Short to Ground
B0080:04 Passenger Seat Position Sensor Circuit Open
B0080:05 Passenger Seat Position Sensor Circuit High Voltage or Open
B0080:06 Passenger Seat Position Sensor Circuit Low Voltage or Open
B0080:08 Passenger Seat Position Sensor Circuit Performance-Signal Invalid
B0080:0C Passenger Seat Position Sensor Circuit Low Current

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0080:06 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0080:06 code?

Need more information on how to fix the B0080:06 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0080:06 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0080:06 Code

1. What are common symptoms of OBDII code B0080:06 Passenger Seat Position Sensor Circuit Low Voltage or Open?

The common symptoms include the airbag warning light illuminated on the dashboard, the passenger airbag being disabled, and potential issues with the airbag system's functionality.

2. What can cause the OBDII code B0080:06 to trigger?

This code can be triggered by a faulty passenger seat position sensor, damaged wiring or connectors in the sensor circuit, or issues with the sensor's calibration.

3. How serious is the B0080:06 OBDII code?

This code indicates a problem with the passenger seat position sensor circuit, which can affect the proper deployment of the airbag in case of an accident. It is important to address this issue promptly.

4. Can I still drive my vehicle with the B0080:06 OBDII code present?

It is recommended to address the underlying issue causing the code as soon as possible to ensure the proper functionality of the airbag system in your vehicle.

5. How can I diagnose and repair the B0080:06 OBDII code?

Diagnosis involves inspecting the passenger seat position sensor, checking the circuit wiring and connectors for damage, and ensuring proper sensor calibration. Repair may involve sensor replacement, wiring repairs, or sensor recalibration.

6. Are there any DIY tips for fixing the B0080:06 code?

If you have the necessary tools and expertise, you may attempt to check the sensor wiring and connectors for visible damage. However, sensor calibration and replacement are best handled by a professional.

7. Can resetting the OBDII system clear the B0080:06 code?

Resetting the system may temporarily clear the code, but it will reappear if the underlying issue is not addressed. It is important to diagnose and repair the cause of the code.

8. How much does it cost to fix the B0080:06 OBDII code?

The cost of fixing this code can vary depending on the cause of the issue, the extent of repairs needed, and whether you choose to do it yourself or seek professional help. It is advisable to get a diagnosis and quote from a trusted mechanic.

9. Will the B0080:06 code affect my vehicle's performance?

While the code itself may not directly impact performance, it signifies a potential safety issue with the airbag system. Ignoring the code could compromise the safety of the vehicle in the event of a collision.

10. How often does the B0080:06 OBDII code occur in vehicles?

The occurrence of this specific code can vary among different vehicle models and makes. However, problems with seat position sensors and airbag systems are relatively common in modern vehicles.