B0080:05 Code - Passenger Seat Position Sensor Circuit High Voltage or Open
Quick Answer
The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0080:05 indicates Passenger Seat Position Sensor Circuit High Voltage or Open.
- Common causes
- Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0080:05 Description
What are the Possible Causes of the DTC B0080:05?
- Faulty Passenger Seat Position Sensor
- Passenger Seat Position Sensor harness is open or shorted
- Passenger Seat Position Sensor circuit poor electrical connection
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
How to Fix the DTC B0080:05?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0080:02 Passenger Seat Position Sensor Circuit Short to Ground
B0080:04 Passenger Seat Position Sensor Circuit Open
B0080:05 Passenger Seat Position Sensor Circuit High Voltage or Open
B0080:06 Passenger Seat Position Sensor Circuit Low Voltage or Open
B0080:08 Passenger Seat Position Sensor Circuit Performance-Signal Invalid
B0080:0C Passenger Seat Position Sensor Circuit Low Current
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0080:05 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0080:05 code?
Need more information on how to fix the B0080:05 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0080:05 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0080:05 Code
What does the OBDII code B0080:05 mean?
It indicates a problem with the passenger seat position sensor circuit, specifically high voltage or an open circuit.
What are the common symptoms of code B0080:05?
Symptoms may include the airbag warning light on, potential deactivation of the passenger airbag, and failure to detect the passenger seat position correctly.
What causes the B0080:05 code to appear?
Common causes include damaged wiring, a faulty passenger seat position sensor, loose or corroded electrical connections, or issues with the airbag control module.
Can I drive with the B0080:05 code active?
Driving with this code is not recommended, as it may impair the airbag system’s ability to function properly in an accident.
How do you diagnose the B0080:05 code?
A mechanic will typically inspect the sensor wiring, check for loose or corroded connections, and test the seat position sensor and airbag control module.
Can a faulty passenger seat position sensor trigger the B0080:05 code?
Yes, a malfunctioning passenger seat position sensor is a common cause of this code.
How can the B0080:05 code be repaired?
Repairs may involve replacing damaged wiring, repairing connections, or replacing the passenger seat position sensor if it is faulty.
How much does it cost to fix the B0080:05 code?
The repair cost varies but typically ranges from $100 to $500, depending on parts and labor required.
Does the B0080:05 code affect the airbag system?
Yes, this code can impact the airbag system, potentially causing it to malfunction or deactivate the passenger airbag.
Is it possible to prevent the B0080:05 code?
Regular inspections and maintenance of seat sensor wiring and connections can help prevent this code from appearing.
Discuss the causes and fixes for B0080:05 OBDII Code
Code B0080:05 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
