AutoCodes – Buick – B0066 Buick

B0066 Buick Code - Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range

Quick Answer

The driver seat belt pretensioner deployment loop consists of a seat belt pretensioner - LF and the seat belt pretensioner - LF high and low circuits. Common causes include Faulty Left Front/Driver Pretensioner, Left Front/Driver Pretensioner harness is open or shorted, Left Front/Driver Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0066 Buick indicates Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range.
Common causes: Common causes include Faulty Left Front/Driver Pretensioner, Left Front/Driver Pretensioner harness is open or shorted, Left Front/Driver Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,504

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 28, 2020

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0066 Buick Description

The driver seat belt pretensioner deployment loop consists of a seat belt pretensioner - LF and the seat belt pretensioner - LF high and low circuits. A shorting bar used within the seat belt pretensioner connector shorts together both the seat belt pretensioner high and low circuits when the connector is disconnected. This will help to prevent unwanted deployment of the pretensioner during servicing. During a frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy the seat belt pretensioner. The SDM performs continuous diagnostic tests on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored in memory.

OBDII Code B0066 Buick - Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range - AutoCodes.com — B0066 Buick Code - Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range

What does this mean?

What are the Possible Causes of the DTC B0066 Buick?

Faulty Left Front/Driver Pretensioner
Left Front/Driver Pretensioner harness is open or shorted
Left Front/Driver Pretensioner circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0066 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0066 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0066 Buick code?

Need more information on how to fix the B0066 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0066 Buick code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0066 Buick Code

1. What are the common symptoms of OBDII code B0066 in a Buick related to the Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the driver-side pretensioner system.

2. What are the possible causes of OBDII code B0066 in a Buick indicating Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range?

- Causes may include a faulty pretensioner deployment loop, wiring issues, poor electrical connections, or a malfunctioning airbag control module.

3. How can I diagnose the OBDII code B0066 in my Buick for the Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range?

- Diagnosis involves using a scan tool to retrieve the specific fault code, inspecting the pretensioner system components, checking wiring for damage, and testing the voltage in the deployment loop.

4. What precautions should I take when working on the pretensioner system related to OBDII code B0066 in my Buick?

- Always disconnect the vehicle's battery and wait for the specified amount of time before working on the airbag system to avoid accidental deployment.

5. Can I repair OBDII code B0066 in my Buick indicating Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range myself?

- Repairing this issue typically requires advanced knowledge and tools, so it is recommended to have a professional technician diagnose and fix the problem to ensure safety and proper functionality.

6. Are there any common mistakes to avoid when troubleshooting OBDII code B0066 in a Buick for the Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range?

- Avoid assuming the issue is solely with the pretensioner itself; make sure to thoroughly check the wiring, connections, and airbag control module for potential faults.

7. How critical is it to address OBDII code B0066 in a Buick related to Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range?

- It is crucial to address this code promptly as it relates to the safety of the driver in the event of a collision, and unresolved issues with the pretensioner system can affect the proper deployment of the airbag.

8. Can a faulty seatbelt pretensioner cause OBDII code B0066 in a Buick to trigger the Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range?

- Yes, a malfunctioning seatbelt pretensioner can contribute to triggering this code, as the entire pretensioner system works together to ensure proper restraint and protection in a crash.

9. Is resetting the airbag system necessary after repairing OBDII code B0066 in a Buick for the Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range?

- Yes, it is recommended to reset the airbag system using a compatible scan tool after any repairs to ensure that the fault code is cleared, and the system is functioning correctly.

10. How can I prevent OBDII code B0066 from recurring in my Buick after repairing the Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range issue?

- To prevent code recurrence, ensure all repairs are performed correctly, conduct thorough testing of the pretensioner system, and address any underlying electrical or wiring issues that may have caused the fault initially.