B0060 Mercury Code - Driver Seatbelt Tension Sensor
Quick Answer
The Restraints Control Module (RCM) monitors all deployable device and sensor circuits for a signal cross coupled (short) between circuits. Common causes include Faulty Driver Seatbelt Tension Sensor, Driver Seatbelt Tension Sensor harness is open or shorted, Driver Seatbelt Tension Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0060 Mercury indicates Driver Seatbelt Tension Sensor.
- Common causes
- Common causes include Faulty Driver Seatbelt Tension Sensor, Driver Seatbelt Tension Sensor harness is open or shorted, Driver Seatbelt Tension Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0060 Mercury Description
What are the Possible Causes of the DTC B0060 Mercury?
- Faulty Driver Seatbelt Tension Sensor
- Driver Seatbelt Tension Sensor harness is open or shorted
- Driver Seatbelt Tension Sensor circuit poor electrical connection
How to Fix the DTC B0060 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0060 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0060 Mercury code?
Need more information on how to fix the B0060 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0060 Mercury code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0060 Mercury Code
1. What does OBDII code B0060 for Mercury indicate?
The OBDII code B0060 for Mercury specifically relates to the Driver Seatbelt Tension Sensor.
2. What are the common symptoms associated with OBDII code B0060 in a Mercury vehicle?
Common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the seatbelt pretensioner system.
3. What are the possible causes of OBDII code B0060 in a Mercury related to the Driver Seatbelt Tension Sensor?
Causes can range from a faulty seatbelt tension sensor, damaged wiring or connectors in the system, to issues with the airbag control module.
4. How can I diagnose the OBDII code B0060 in my Mercury vehicle?
Diagnosis typically involves using a professional OBDII scanner to read the code, followed by inspecting the seatbelt tension sensor, wiring, and related components for any visible damage.
5. Can I repair OBDII code B0060 in my Mercury at home?
While some DIY enthusiasts may attempt to address this issue, it is recommended to consult a qualified mechanic or dealership for proper diagnosis and repair, as dealing with airbag systems requires expertise.
6. Is it safe to continue driving my Mercury with OBDII code B0060 present?
It is not advisable to drive the vehicle with any airbag-related issues, as it can compromise the effectiveness of the safety systems in case of an accident. Get it inspected and repaired promptly.
7. Are there any recalls or technical service bulletins related to OBDII code B0060 in Mercury vehicles?
It is recommended to check with Mercury or your local dealership for any recalls or technical bulletins related to the Driver Seatbelt Tension Sensor issue.
8. How much does it typically cost to repair OBDII code B0060 in a Mercury vehicle?
Repair costs can vary depending on the exact cause of the issue and the labor rates of the repair shop. It's best to get a diagnostic assessment to determine the cost accurately.
9. Can resetting the OBDII code B0060 in my Mercury fix the issue temporarily?
Resetting the code may temporarily turn off the warning light, but it will not fix the underlying problem with the Driver Seatbelt Tension Sensor. It's essential to address the root cause.
10. Is the OBDII code B0060 specific to Mercury vehicles, or can it occur in other car brands as well?
While the code is specific to Mercury vehicles, similar codes related to seatbelt tension sensors may appear in other car brands, each with its unique diagnostic and repair procedures.
Discuss the causes and fixes for B0060 Mercury OBDII Code
Code B0060 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
