AutoCodes – GMC – B0052 2017 GMC Sierra

B0052 2017 GMC Sierra Code - Deployment Commanded

Quick Answer

The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0052 2017 GMC Sierra indicates Deployment Commanded.
Common causes: Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 292

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0052 2017 GMC Sierra Description

The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. The SDM processes the generated electrical signals and compares them to values stored in memory. When the generated signals exceed the stored values, the SDM performs additional signal processing and compares the generated signals to signals stored in memory. When 2 of the generated signals exceed the stored values, the SDM will cause current to flow through the inflator modules, deploying the inflator modules, and causing DTC B0052 to set.

OBDII Code B0052 2017 GMC Sierra - Deployment Commanded - AutoCodes.com — B0052 2017 GMC Sierra Code - Deployment Commanded

What does this mean?

What are the Possible Causes of the DTC B0052 2017 GMC Sierra?

Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted
Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection

How to Fix the DTC B0052 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0052 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0052 2017 GMC Sierra code?

Need more information on how to fix the B0052 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0052 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0052 2017 GMC Sierra Code

1. What does OBDII code B0052 for a 2017 GMC Sierra mean?

The B0052 code indicates that the Deployment Commanded signal from the sensing and diagnostic module (SDM) has been detected as being stuck on.

2. What are the common symptoms of OBDII code B0052 in a 2017 GMC Sierra?

Common symptoms of code B0052 may include the airbag warning light being illuminated on the dashboard and potential issues with the airbag system.

3. What are possible causes of OBDII code B0052 in a 2017 GMC Sierra?

Possible causes of code B0052 can include a faulty SDM, wiring issues, a malfunctioning clock spring, or problems with the airbag system itself.

4. How can I diagnose OBDII code B0052 in my 2017 GMC Sierra?

Diagnosing code B0052 typically involves using a professional OBDII scanner to retrieve the code, inspecting the wiring and connections related to the airbag system, and performing tests on the SDM and other components.

5. Is it safe to drive my 2017 GMC Sierra with OBDII code B0052?

It is not recommended to drive the vehicle with an active airbag system fault code like B0052, as it may compromise the functionality of the airbags in the event of a collision.

6. Can I reset OBDII code B0052 in my 2017 GMC Sierra by disconnecting the battery?

While disconnecting the battery may clear the code temporarily, it is important to diagnose and repair the underlying issue causing code B0052 to prevent it from recurring.

7. How much does it typically cost to repair OBDII code B0052 in a 2017 GMC Sierra?

The cost of repairing code B0052 can vary depending on the specific cause of the issue, but it may involve replacing components like the SDM, clock spring, or repairing wiring, potentially ranging from a few hundred to over a thousand dollars.

8. Can I fix OBDII code B0052 in my 2017 GMC Sierra myself?

Repairing code B0052 may require specialized tools and knowledge of airbag systems, so it is recommended to consult a professional mechanic or dealership to properly diagnose and repair the issue.

9. Will OBDII code B0052 cause my 2017 GMC Sierra to fail a car inspection?

Since code B0052 relates to the airbag system, it is possible that it may cause your vehicle to fail a safety inspection, depending on local regulations and the severity of the issue.

10. How long does it typically take to repair OBDII code B0052 in a 2017 GMC Sierra?

The repair time for code B0052 can vary based on the cause of the issue and the availability of parts, but it may take a few hours to a full day to diagnose and fix the problem.