AutoCodes – GMC – B0052 2016 GMC Sierra

B0052 2016 GMC Sierra Code - Deployment Commanded

Quick Answer

The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0052 2016 GMC Sierra indicates Deployment Commanded.
Common causes: Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 319

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0052 2016 GMC Sierra Description

The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. The SDM processes the generated electrical signals and compares them to values stored in memory. When the generated signals exceed the stored values, the SDM performs additional signal processing and compares the generated signals to signals stored in memory. When 2 of the generated signals exceed the stored values, the SDM will cause current to flow through the inflator modules, deploying the inflator modules, and causing DTC B0052 to set.

OBDII Code B0052 2016 GMC Sierra - Deployment Commanded - AutoCodes.com — B0052 2016 GMC Sierra Code - Deployment Commanded

What does this mean?

What are the Possible Causes of the DTC B0052 2016 GMC Sierra?

Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted
Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection

How to Fix the DTC B0052 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0052 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0052 2016 GMC Sierra code?

Need more information on how to fix the B0052 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0052 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0052 2016 GMC Sierra Code

1. What does OBDII code B0052 for a 2016 GMC Sierra mean?

The B0052 code for a 2016 GMC Sierra indicates a problem with the Deployment Commanded circuit, specifically related to the driver-side airbag.

2. What are common symptoms of OBDII code B0052 in a GMC Sierra?

Common symptoms of code B0052 in a GMC Sierra may include an illuminated airbag warning light on the dashboard and potential non-deployment of the driver-side airbag during a collision.

3. What are possible causes of OBDII code B0052 in a 2016 GMC Sierra?

Causes of code B0052 in a 2016 GMC Sierra may include a faulty driver-side airbag module, damaged wiring or connectors in the airbag system, or issues with the airbag control module.

4. How can I diagnose OBDII code B0052 in my 2016 GMC Sierra?

Diagnosing code B0052 in a 2016 GMC Sierra typically involves using a diagnostic scan tool to retrieve the specific fault codes, checking the wiring and connectors in the airbag system, and testing the driver-side airbag module for proper functionality.

5. Can I drive my 2016 GMC Sierra with OBDII code B0052?

It is not recommended to drive your 2016 GMC Sierra with an active B0052 code, as it indicates a potential issue with the driver-side airbag system, which is a critical safety component.

6. How can I repair OBDII code B0052 in my 2016 GMC Sierra?

Repairing code B0052 in a 2016 GMC Sierra may involve replacing the driver-side airbag module, repairing or replacing damaged wiring or connectors, or resetting the airbag control module after addressing the underlying issue.

7. Is it safe to reset the OBDII code B0052 in my GMC Sierra without fixing the underlying problem?

Resetting the B0052 code in your GMC Sierra without fixing the underlying issue can be unsafe, as it may lead to continued malfunction of the driver-side airbag system and compromise occupant safety during a collision.

8. How much does it cost to repair OBDII code B0052 in a 2016 GMC Sierra?

The cost to repair OBDII code B0052 in a 2016 GMC Sierra can vary depending on the specific cause of the issue, but it may involve parts and labor costs for replacing the driver-side airbag module or repairing the airbag system components.

9. Can a DIY enthusiast fix OBDII code B0052 in a 2016 GMC Sierra?

While some DIY enthusiasts may have the skills to diagnose and repair simple issues related to code B0052, working on the airbag system of a vehicle requires specialized knowledge and tools. It is recommended to seek professional assistance for airbag system repairs.

10. How often does OBDII code B0052 occur in a 2016 GMC Sierra?

OBDII code B0052 for the Deployment Commanded circuit in a 2016 GMC Sierra is relatively uncommon but should be addressed promptly to ensure the proper functioning of the driver-side airbag system.