B0044 Chevrolet Code - Driver Frontal Deployment Loop Stage 2 Open
Quick Answer
The driver deployment loop consists of the following components: - A dual-stage inflatable restraint steering wheel module - The inflatable restraint steering wheel module coil - The steering wheel module high circuits for both stages 1 and 2 - The steering wheel module low circuits for both stages 1 and 2 There are 2 shorting bars used within the steering wheel module coil connector. Common causes include Faulty Steering Wheel Module Coil, Steering Wheel Module Coil harness is open or shorted, Steering Wheel Module Coil circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0044 Chevrolet indicates Driver Frontal Deployment Loop Stage 2 Open.
- Common causes
- Common causes include Faulty Steering Wheel Module Coil, Steering Wheel Module Coil harness is open or shorted, Steering Wheel Module Coil circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0044 Chevrolet Description
- A dual-stage inflatable restraint steering wheel module
- The inflatable restraint steering wheel module coil
- The steering wheel module high circuits for both stages 1 and 2
- The steering wheel module low circuits for both stages 1 and 2
There are 2 shorting bars used within the steering wheel module coil connector. These shorting bars short together both stages of the steering wheel module high circuit and the steering wheel module low circuit when the connector is disconnected. This helps prevent unwanted deployment of the inflator module during servicing. During a frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop. This flow of current will deploy the steering wheel module. The SDM performs continuous diagnostic tests on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If a malfunction is detected, a DTC will be stored in memory.
What are the Possible Causes of the DTC B0044 Chevrolet?
- Faulty Steering Wheel Module Coil
- Steering Wheel Module Coil harness is open or shorted
- Steering Wheel Module Coil circuit poor electrical connection
- Faulty Steering Wheel Module
How to Fix the DTC B0044 Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0044 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0044 Chevrolet code?
Need more information on how to fix the B0044 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0044 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0044 Chevrolet Code
1. What are common symptoms of OBDII code B0044 (Chevrolet) Driver Frontal Deployment Loop Stage 2 Open?
- Common symptoms include the airbag warning light illuminating on the dashboard, non-deployment of the driver's frontal airbag during a collision, and a diagnostic trouble code (DTC) being stored in the vehicle's computer.
2. What does the OBDII code B0044 (Chevrolet) indicate about the Driver Frontal Deployment Loop Stage 2 Open?
- This code indicates that there is an open circuit in the stage 2 deployment loop of the driver's frontal airbag system in a Chevrolet vehicle.
3. What are the possible causes of OBDII code B0044 (Chevrolet) Driver Frontal Deployment Loop Stage 2 Open?
- Possible causes include a faulty airbag module, damaged wiring or connectors in the airbag system, a defective clockspring, or issues with the airbag deployment sensors.
4. How can I diagnose and repair OBDII code B0044 (Chevrolet) myself?
- Diagnosing and repairing this code requires specialized equipment and knowledge of airbag systems. It is recommended to have a professional technician properly diagnose and repair the issue to ensure safety.
5. Can I still drive my Chevrolet with OBDII code B0044 (Driver Frontal Deployment Loop Stage 2 Open)?
- While the vehicle may still be operational, it is not recommended to drive with a malfunctioning airbag system. The airbags may not deploy in the event of a collision, potentially increasing the risk of injury.
6. How much does it cost to repair OBDII code B0044 (Chevrolet) Driver Frontal Deployment Loop Stage 2 Open?
- Repair costs can vary depending on the underlying cause of the issue. It is best to consult with a professional technician for an accurate diagnosis and cost estimate.
7. Is it safe to reset the OBDII code B0044 (Chevrolet) Driver Frontal Deployment Loop Stage 2 Open without repairing the issue?
- It is not recommended to reset the code without addressing the underlying problem, as it could compromise the safety of the airbag system. It is important to have the issue properly diagnosed and repaired.
8. Can a DIY enthusiast repair OBDII code B0044 (Chevrolet) Driver Frontal Deployment Loop Stage 2 Open?
- Due to the complexity and safety considerations of airbag systems, it is best to leave the diagnosis and repair of this code to trained professionals with the necessary tools and expertise.
9. How long does it typically take to repair OBDII code B0044 (Chevrolet) Driver Frontal Deployment Loop Stage 2 Open?
- The repair time can vary depending on the exact cause of the issue and the availability of parts. It is advisable to consult with a technician for a more accurate estimate of the repair timeline.
10. Are there any recalls related to OBDII code B0044 (Chevrolet) Driver Frontal Deployment Loop Stage 2 Open?
- It is recommended to check with Chevrolet or the National Highway Traffic Safety Administration (NHTSA) to see if there are any recalls related to this specific OBDII code.
Discuss the causes and fixes for B0044 Chevrolet OBDII Code
Code B0044 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
