AutoCodes – Honda – B0028 Honda

B0028 Honda Code - Decreased Resistance In The Front Passenger's Side Airbag

Quick Answer

The Driver Side Airbag is located in the center of the steering wheel. Common causes include Faulty Front Passenger's Side Airbag, Front Passenger's Side Airbag harness is open or shorted, Front Passenger's Side Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0028 Honda indicates Decreased Resistance In The Front Passenger's Side Airbag.
Common causes: Common causes include Faulty Front Passenger's Side Airbag, Front Passenger's Side Airbag harness is open or shorted, Front Passenger's Side Airbag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 17,757

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0028 Honda Description

The Driver Side Airbag is located in the center of the steering wheel. The front passenger side airbag is located in the dashboard on the front passenger side. The airbag modules adopt dual inflators for the driver side and/or the front passenger side airbag according to the specifications. The dual inflators increase airbag effectiveness by properly adjusting the timing when the two inflators are ignited (together or sequentially) referring to the collision speed or collision impact.

OBDII Code B0028 Honda - Decreased Resistance In The Front Passenger's Side Airbag - AutoCodes.com — B0028 Honda Code - Decreased Resistance In The Front Passenger's Side Airbag

What does this mean?

What are the Possible Causes of the DTC B0028 Honda?

Faulty Front Passenger's Side Airbag
Front Passenger's Side Airbag harness is open or shorted
Front Passenger's Side Airbag circuit poor electrical connection

How to Fix the DTC B0028 Honda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

DTC B0028-1A: Decreased Resistance In The Front Passenger's Side Airbag Inflator
DTC B0028-11: Short To Ground In The Front Passenger's Side Airbag Inflator
DTC B0028-12: Short To Power In The Front Passenger's Side Airbag Inflator
DTC B0028-13: Open Or Increased Resistance In The Front Passenger's Side Airbag Inflator

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0028 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0028 Honda code?

Need more information on how to fix the B0028 Honda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0028 Honda code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0028 Honda Code

1. What are common symptoms of OBDII code B0028 related to decreased resistance in the front passenger's side airbag?

- Common symptoms include the airbag warning light being illuminated on the dashboard and a potential message indicating an issue with the passenger airbag system.

2. What are possible causes of OBDII code B0028 in a Honda vehicle?

- The code B0028 in a Honda may be triggered by issues such as a faulty front passenger's side airbag module, damaged wiring, or a poor connection in the airbag system.

3. How serious is the issue of decreased resistance in the front passenger's side airbag?

- This issue is considered serious as it can affect the proper deployment of the airbag in the event of a collision, potentially compromising passenger safety.

4. Can I continue to drive my Honda with OBDII code B0028 present?

- It is not recommended to drive your Honda with code B0028 present, as the passenger's side airbag may not deploy correctly in case of an accident, increasing the risk of injury.

5. How can I diagnose and repair OBDII code B0028 in my Honda?

- Diagnosis typically involves using a scan tool to retrieve the fault code and then inspecting the airbag system components, wiring, and connections. Repair may involve replacing the faulty airbag module or repairing damaged wiring.

6. Are there any safety precautions to take when working on the airbag system to resolve code B0028?

- It is crucial to disconnect the vehicle's battery and wait at least 3 minutes before working on the airbag system to avoid accidental deployment and ensure safety.

7. Can a DIY enthusiast repair OBDII code B0028, or is it best left to professionals?

- Repairing OBDII code B0028 related to the front passenger's side airbag is best left to professionals due to the complexity and safety considerations associated with working on airbag systems.

8. Will resetting the OBDII code B0028 clear the issue with the front passenger's side airbag?

- Simply resetting the code will not fix the underlying issue causing code B0028. It is essential to diagnose the problem and perform the necessary repairs to ensure proper airbag function.

9. How much can I expect to pay to fix OBDII code B0028 in my Honda?

- The cost of repairing OBDII code B0028 can vary depending on the exact cause of the issue, but it may range from a hundred to a few hundred dollars, including parts and labor.

10. Is it necessary to have the airbag system inspected after resolving OBDII code B0028 to ensure proper functionality?

- Yes, it is highly recommended to have the airbag system inspected and tested by a qualified technician after resolving code B0028 to ensure that the front passenger's side airbag is functioning correctly and will deploy as intended in an emergency.