B0024 Pontiac Code - Driver Frontal Deployment Loop Single Stage or Stage 1 Voltage Out of Range
Quick Answer
The driver deployment loop consists of the following components: - A dual-stage inflatable restraint steering wheel module - The inflatable restraint steering wheel module coil - The steering wheel module high circuits for both stages 1 and 2 - The steering wheel module low circuits for both stages 1 and 2 There are 2 shorting bars used within the steering wheel module coil connector. Common causes include Faulty Steering Wheel Module Coil, Steering Wheel Module Coil harness is open or shorted, Steering Wheel Module Coil circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0024 Pontiac indicates Driver Frontal Deployment Loop Single Stage or Stage 1 Voltage Out of Range.
- Common causes
- Common causes include Faulty Steering Wheel Module Coil, Steering Wheel Module Coil harness is open or shorted, Steering Wheel Module Coil circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0024 Pontiac Description
- A dual-stage inflatable restraint steering wheel module
- The inflatable restraint steering wheel module coil
- The steering wheel module high circuits for both stages 1 and 2
- The steering wheel module low circuits for both stages 1 and 2
There are 2 shorting bars used within the steering wheel module coil connector. These shorting bars short together both stages of the steering wheel module high circuit and the steering wheel module low circuit when the connector is disconnected. This helps prevent unwanted deployment of the inflator module during servicing. During a frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop. This flow of current will deploy the steering wheel module. The SDM performs continuous diagnostic tests on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If a malfunction is detected, a DTC will be stored in memory.
What are the Possible Causes of the DTC B0024 Pontiac?
- Faulty Steering Wheel Module Coil
- Steering Wheel Module Coil harness is open or shorted
- Steering Wheel Module Coil circuit poor electrical connection
- Faulty Steering Wheel Module
How to Fix the DTC B0024 Pontiac?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0024 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0024 Pontiac code?
Need more information on how to fix the B0024 Pontiac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0024 Pontiac code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0024 Pontiac Code
1. What are the common symptoms of OBDII code B0024 in a Pontiac?
- Common symptoms include the airbag warning light illuminating on the dashboard, intermittent or constant illumination of the airbag light, and potential non-deployment of the driver frontal airbag in the event of a collision.
2. What causes the OBDII code B0024 in a Pontiac?
- The B0024 code is triggered when the driver frontal deployment loop's voltage is out of range, indicating a potential issue with the wiring, connectors, or components related to the driver's frontal airbag system.
3. How serious is the OBDII code B0024 in a Pontiac?
- The B0024 code relates to the driver frontal airbag system, which is a critical safety feature in the vehicle. Ignoring or neglecting this issue could result in the airbag not deploying correctly in the event of an accident, potentially leading to increased risk of injury to the driver.
4. What are some DIY repair tips for addressing the B0024 code in a Pontiac?
- DIY repair tips include checking the wiring and connectors related to the driver frontal airbag system for any visible damage or corrosion, ensuring proper connection and continuity, and resetting the airbag system using an OBDII scanner after addressing any potential issues.
5. Can I still drive my Pontiac with the B0024 code present?
- It is not recommended to drive the vehicle with the B0024 code present, as it indicates a potential issue with the driver frontal airbag system. Driving with a malfunctioning airbag system can compromise your safety in the event of a collision.
6. How much does it typically cost to repair the B0024 code in a Pontiac?
- The cost of repairing the B0024 code can vary depending on the underlying cause of the issue. Costs may include labor charges for diagnosis and repair, replacement of damaged components, and potential reprogramming of the airbag system.
7. Can the B0024 code be reset without fixing the underlying issue in a Pontiac?
- While it is possible to clear the B0024 code temporarily using an OBDII scanner, it is essential to address the underlying issue causing the fault code to prevent potential safety risks associated with the driver frontal airbag system.
8. Is the B0024 code a common problem in Pontiac vehicles?
- The B0024 code related to the driver frontal deployment loop voltage out of range is not uncommon in Pontiac vehicles, particularly in models equipped with airbag systems that may develop wiring or connector issues over time.
9. How can a mechanic diagnose the B0024 code in a Pontiac?
- A mechanic can diagnose the B0024 code by using a diagnostic scan tool to retrieve the fault code, inspecting the wiring and connectors in the driver frontal airbag system for damage, testing the components for proper functionality, and conducting a thorough system check to pinpoint the issue.
10. Are there any recalls or technical service bulletins related to the B0024 code in Pontiac vehicles?
- It is advisable to check with the manufacturer or authorized dealerships for any recalls or technical service bulletins related to the B0024 code in Pontiac vehicles, as there may be specific guidance or remedies provided for addressing this issue in certain models.
Discuss the causes and fixes for B0024 Pontiac OBDII Code
Code B0024 Pontiac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
