AutoCodes – Chevrolet – B0022 2017 Chevrolet Silverado

B0022 2017 Chevrolet Silverado Code - Passenger Seat Belt Retractor Pretensioner Deployment Loop

Quick Answer

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Passenger Seat Belt Retractor Pretensioner, Passenger Seat Belt Retractor Pretensioner harness is open or shorted, Passenger Seat Belt Retractor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0022 2017 Chevrolet Silverado indicates Passenger Seat Belt Retractor Pretensioner Deployment Loop.
Common causes: Common causes include Faulty Passenger Seat Belt Retractor Pretensioner, Passenger Seat Belt Retractor Pretensioner harness is open or shorted, Passenger Seat Belt Retractor Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 622

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0022 2017 Chevrolet Silverado Description

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. The initiator is part of the seat belt pretensioner deployment loop. When the vehicle is involved in a collision of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) causes current to flow through the seat belt deployment loops to the initiator. Current passing through the initiator ignites the material in the canister producing a rapid generation of gas. The gas produced from this reaction deploys the seat belt pretensioners which removes all of the slack in the seat belts. Depending on the severity of the collision, the seat belt pretensioners may deploy without the frontal air bags deploying, or they will deploy immediately before the frontal air bags deploy. A shorting bar (if equipped) is located in the connector.

OBDII Code B0022 2017 Chevrolet Silverado - Passenger Seat Belt Retractor Pretensioner Deployment Loop - AutoCodes.com — B0022 2017 Chevrolet Silverado Code - Passenger Seat Belt Retractor Pretensioner Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B0022 2017 Chevrolet Silverado?

Faulty Passenger Seat Belt Retractor Pretensioner
Passenger Seat Belt Retractor Pretensioner harness is open or shorted
Passenger Seat Belt Retractor Pretensioner circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0022 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0022:01 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Battery
B0022:02 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Ground
B0022:04 Passenger Seat Belt Anchor Pretensioner Deployment Loop Open
B0022:0D Passenger Seat Belt Anchor Pretensioner Deployment Loop High Resistance
B0022:0E Passenger Seat Belt Anchor Pretensioner Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0022 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0022 2017 Chevrolet Silverado code?

Need more information on how to fix the B0022 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0022 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0022 2017 Chevrolet Silverado Code

1. What does the OBDII code B0022 mean for a 2017 Chevrolet Silverado?

The code B0022 indicates a problem with the Passenger Seat Belt Retractor Pretensioner Deployment Loop in a 2017 Chevrolet Silverado.

2. What are the common symptoms of OBDII code B0022 in a 2017 Chevrolet Silverado?

Common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the passenger seat belt functionality.

3. What are the possible causes of OBDII code B0022 in a 2017 Chevrolet Silverado?

Possible causes of code B0022 can include a faulty seat belt pretensioner, wiring issues, or a malfunctioning airbag control module.

4. How can I diagnose the OBDII code B0022 in my 2017 Chevrolet Silverado?

Diagnosing code B0022 requires using a diagnostic scanner to retrieve the specific fault code, followed by inspecting the seat belt components, wiring, and the airbag system for any visible damage or issues.

5. Can I drive my 2017 Chevrolet Silverado with OBDII code B0022?

It is not recommended to drive the vehicle with an active B0022 code, as it indicates a potential safety issue with the passenger seat belt pretensioner system.

6. How can I repair OBDII code B0022 on my 2017 Chevrolet Silverado?

Repairing code B0022 may involve replacing the faulty seat belt pretensioner, repairing any damaged wiring, or resetting the airbag control module after the issue has been resolved.

7. Are there any safety concerns associated with OBDII code B0022 in a 2017 Chevrolet Silverado?

Yes, code B0022 relates to the passenger seat belt pretensioner system, which is a critical safety component designed to protect occupants in the event of a collision.

8. Can I reset the OBDII code B0022 in my 2017 Chevrolet Silverado without fixing the issue?

Resetting the code without addressing the underlying problem will likely result in the code reappearing once the vehicle is driven and the system detects the fault again.

9. Are there any recalls or service bulletins related to OBDII code B0022 in a 2017 Chevrolet Silverado?

It's advisable to check with a Chevrolet dealership or the manufacturer to see if there are any related recalls or service bulletins addressing the B0022 code for your specific vehicle.

10. How can I prevent OBDII code B0022 from occurring in my 2017 Chevrolet Silverado?

Regularly inspecting and maintaining the seat belt pretensioner system, as well as ensuring proper handling of the airbag components during repairs or maintenance, can help prevent the occurrence of code B0022 in your Chevrolet Silverado.