AutoCodes – GMC – B0022 2015 GMC Sierra

B0022 2015 GMC Sierra Code - Passenger Seat Belt Retractor Pretensioner Deployment Loop

Quick Answer

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Passenger Seat Belt Retractor Pretensioner, Passenger Seat Belt Retractor Pretensioner harness is open or shorted, Passenger Seat Belt Retractor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0022 2015 GMC Sierra indicates Passenger Seat Belt Retractor Pretensioner Deployment Loop.
Common causes: Common causes include Faulty Passenger Seat Belt Retractor Pretensioner, Passenger Seat Belt Retractor Pretensioner harness is open or shorted, Passenger Seat Belt Retractor Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 353

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0022 2015 GMC Sierra Description

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. The initiator is part of the seat belt pretensioner deployment loop. When the vehicle is involved in a collision of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) causes current to flow through the seat belt deployment loops to the initiator. Current passing through the initiator ignites the material in the canister producing a rapid generation of gas. The gas produced from this reaction deploys the seat belt pretensioners which removes all of the slack in the seat belts. Depending on the severity of the collision, the seat belt pretensioners may deploy without the frontal air bags deploying, or they will deploy immediately before the frontal air bags deploy. A shorting bar (if equipped) is located in the connector.

OBDII Code B0022 2015 GMC Sierra - Passenger Seat Belt Retractor Pretensioner Deployment Loop - AutoCodes.com — B0022 2015 GMC Sierra Code - Passenger Seat Belt Retractor Pretensioner Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B0022 2015 GMC Sierra?

Faulty Passenger Seat Belt Retractor Pretensioner
Passenger Seat Belt Retractor Pretensioner harness is open or shorted
Passenger Seat Belt Retractor Pretensioner circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0022 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0022:01 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Battery
B0022:02 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Ground
B0022:04 Passenger Seat Belt Anchor Pretensioner Deployment Loop Open
B0022:0D Passenger Seat Belt Anchor Pretensioner Deployment Loop High Resistance
B0022:0E Passenger Seat Belt Anchor Pretensioner Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0022 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0022 2015 GMC Sierra code?

Need more information on how to fix the B0022 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0022 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0022 2015 GMC Sierra Code

1. What does OBDII code B0022 for a 2015 GMC Sierra indicate?

- OBDII code B0022 relates to the Passenger Seat Belt Retractor Pretensioner Deployment Loop.

2. What are the common symptoms of OBDII code B0022 in a 2015 GMC Sierra?

- Common symptoms include the airbag warning light staying on, potential non-deployment of the passenger seat belt pretensioner, and diagnostic trouble codes related to the passenger seat belt system.

3. What are the possible causes of OBDII code B0022 in a 2015 GMC Sierra?

- The code may be triggered by a faulty passenger seat belt retractor pretensioner, a wiring issue in the deployment loop circuit, or a problem with the airbag control module.

4. How can I diagnose the cause of OBDII code B0022 in my 2015 GMC Sierra?

- A thorough inspection of the passenger seat belt system, including the pretensioner and related wiring, is recommended. Checking for loose connections or damaged components is crucial.

5. Can I continue driving my 2015 GMC Sierra with OBDII code B0022 present?

- It is not advisable to drive the vehicle with this code active, as it may indicate a safety issue with the passenger seat belt system. Prompt attention and repair are recommended.

6. Is it possible to reset OBDII code B0022 in a 2015 GMC Sierra without fixing the underlying issue?

- Resetting the code without addressing the root cause will likely result in the code reappearing. It is best to diagnose and repair the problem to ensure proper function.

7. How much does it typically cost to repair OBDII code B0022 in a 2015 GMC Sierra?

- The cost of repair can vary depending on the exact cause of the issue. It may involve replacing the seat belt pretensioner, repairing wiring, or addressing a fault in the airbag system.

8. Can I fix OBDII code B0022 in my 2015 GMC Sierra myself, or is professional help recommended?

- While some basic inspections like checking connections can be done by DIY enthusiasts, diagnosing and repairing the issue related to this code often requires specialized knowledge and tools, so professional help is recommended.

9. Are there any safety concerns associated with OBDII code B0022 in a 2015 GMC Sierra?

- Yes, there are safety concerns since the code is related to the passenger seat belt system. Failure to address the issue could lead to improper functioning of the seat belt pretensioner in the event of a collision.

10. How can I prevent OBDII code B0022 from appearing in my 2015 GMC Sierra in the future?

- Regular maintenance and inspection of the seat belt system, including the pretensioner and related components, can help prevent issues that may trigger this code.