AutoCodes – Generic – B0022:0D

B0022:0D Code - Passenger Seat Belt Retractor Pretensioner Deployment Loop High Resistance

Quick Answer

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Passenger Seat Belt Retractor Pretensioner, Passenger Seat Belt Retractor Pretensioner harness is open or shorted, Passenger Seat Belt Retractor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0022:0D indicates Passenger Seat Belt Retractor Pretensioner Deployment Loop High Resistance.
Common causes: Common causes include Faulty Passenger Seat Belt Retractor Pretensioner, Passenger Seat Belt Retractor Pretensioner harness is open or shorted, Passenger Seat Belt Retractor Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,709

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0022:0D Description

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. The initiator is part of the seat belt pretensioner deployment loop. When the vehicle is involved in a collision of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) causes current to flow through the seat belt deployment loops to the initiator. Current passing through the initiator ignites the material in the canister producing a rapid generation of gas. The gas produced from this reaction deploys the seat belt pretensioners which removes all of the slack in the seat belts. Depending on the severity of the collision, the seat belt pretensioners may deploy without the frontal air bags deploying, or they will deploy immediately before the frontal air bags deploy. A shorting bar (if equipped) is located in the connector. The Diagnostic Trouble Code (DTC) will be set if the pretensioner deployment loop resistance is greater than 4.2 â„¦ for 2 s.

OBDII Code B0022:0D - Passenger Seat Belt Retractor Pretensioner Deployment Loop High Resistance - AutoCodes.com — B0022:0D Code - Passenger Seat Belt Retractor Pretensioner Deployment Loop High Resistance

What does this mean?

What are the Possible Causes of the DTC B0022:0D?

Faulty Passenger Seat Belt Retractor Pretensioner
Passenger Seat Belt Retractor Pretensioner harness is open or shorted
Passenger Seat Belt Retractor Pretensioner circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0022:0D?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0022:01 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Battery
B0022:02 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Ground
B0022:04 Passenger Seat Belt Anchor Pretensioner Deployment Loop Open
B0022:0D Passenger Seat Belt Anchor Pretensioner Deployment Loop High Resistance
B0022:0E Passenger Seat Belt Anchor Pretensioner Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0022:0D code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0022:0D code?

Need more information on how to fix the B0022:0D code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0022:0D code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0022:0D Code

1. What are common symptoms of OBDII code B0022:0D?

The common symptoms of this code include the airbag warning light illuminating on the dashboard and a potential loss of functionality in the passenger seat belt retractor pretensioner.

2. What causes the OBDII code B0022:0D to trigger?

This code is triggered when the passenger seat belt retractor pretensioner deployment loop experiences high resistance, often due to a damaged or faulty pretensioner mechanism.

3. How serious is OBDII code B0022:0D?

This code indicates a potential safety issue as it relates to the passenger seat belt pretensioner system. It is important to address this code promptly to ensure proper functionality in case of an accident.

4. Can I continue driving with OBDII code B0022:0D present?

It is not recommended to continue driving with this code present, as it may compromise the effectiveness of the passenger seat belt retractor pretensioner system in the event of a collision.

5. How can I diagnose OBDII code B0022:0D?

Diagnosing this code typically involves using a diagnostic scanner to retrieve the specific fault code, followed by inspecting the passenger seat belt pretensioner system for any visible damage or issues.

6. What are some repair tips for OBDII code B0022:0D?

Repairing this code may involve replacing the faulty passenger seat belt retractor pretensioner deployment loop or addressing any wiring issues causing high resistance in the system.

7. Can I reset OBDII code B0022:0D without fixing the underlying issue?

While you can clear the code with a diagnostic scanner, it is crucial to address the underlying issue causing the high resistance in the passenger seat belt retractor pretensioner system to ensure safety.

8. How much does it cost to repair OBDII code B0022:0D?

The cost of repairing this code can vary depending on the extent of the damage and the specific components that need to be replaced. It is recommended to consult a professional for an accurate estimate.

9. Can I fix OBDII code B0022:0D myself?

While some DIY enthusiasts may be able to address this code themselves, it is important to have the necessary knowledge and tools to work on the airbag system safely. If in doubt, it is best to seek professional help.

10. Is there a recall for OBDII code B0022:0D?

Recalls related to this specific OBDII code may vary depending on the vehicle make and model. It is recommended to check with the manufacturer or a certified dealership to inquire about any recalls related to this code.