AutoCodesCadillac – B001E Cadillac

B001E Cadillac Code - Driver Seat Inboard Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B001E Cadillac indicates Driver Seat Inboard Side Air Bag Deployment Loop.
Common causes
Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 726
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 05, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B001E Cadillac Description

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. There are 2 shorting bars used within the connector that will short the control circuits together when the connector is disconnected. This will help to prevent unwanted deployment of the air bag during servicing.
OBDII Code B001E Cadillac -  Driver Seat Inboard Side Air Bag Deployment Loop - AutoCodes.com
B001E Cadillac Code - Driver Seat Inboard Side Air Bag Deployment Loop

What are the Possible Causes of the DTC B001E Cadillac?

  • Faulty Driver Seat Inboard Side Air Bag
  • Driver Seat Inboard Side Air Bag harness is open or shorted
  • Driver Seat Inboard Side Air Bag circuit poor electrical connection
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B001E Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B001E Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B001E Cadillac code?

Need more information on how to fix the B001E Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001E Cadillac code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001E Cadillac Code

1. What does the OBDII code B001E for Cadillac mean?

The code B001E indicates a problem with the Driver Seat Inboard Side Air Bag Deployment Loop in a Cadillac.

2. What are the common symptoms of the B001E OBDII code in a Cadillac?

Common symptoms include the airbag warning light being illuminated on the dashboard and potential issues with the driver seat airbag system.

3. What are some possible causes of the B001E code in a Cadillac?

Potential causes of the B001E code include a malfunctioning airbag sensor, wiring issues, or a faulty airbag module.

4. How can I diagnose the B001E code in my Cadillac?

Diagnosing the B001E code typically involves using a diagnostic scanner to retrieve the specific error code and then conducting a visual inspection of the airbag system components.

5. Can I still drive my Cadillac with the B001E OBDII code present?

It is not recommended to drive the Cadillac with the B001E code active, as it indicates a potential issue with the driver seat airbag system, which may not deploy in case of an accident.

6. How can I repair the B001E OBDII code in my Cadillac?

Repairing the B001E code usually involves fixing the underlying issue causing the fault, such as replacing a faulty sensor, repairing damaged wiring, or resetting the airbag module.

7. Is it safe to reset the B001E code in my Cadillac without fixing the underlying problem?

Resetting the B001E code without addressing the root cause is not recommended, as it may lead to the airbag system not functioning correctly in the event of an accident.

8. How much does it cost to repair the B001E code in a Cadillac?

The cost of repairing the B001E code can vary depending on the specific issue and the labor rates of the repair shop, but it is generally advisable to address the problem promptly.

9. Can a DIY enthusiast fix the B001E OBDII code in a Cadillac?

While some basic troubleshooting steps can be performed by DIY enthusiasts, fixing the B001E code may require specialized tools and expertise, so it is recommended to consult a professional mechanic.

10. How can I prevent the B001E OBDII code from reoccurring in my Cadillac?

Regular maintenance checks, careful handling of the airbag system components, and prompt repair of any related issues can help prevent the B001E code from reoccurring in a Cadillac.

Discuss the causes and fixes for B001E Cadillac OBDII Code

Code B001E Cadillac comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play