AutoCodes – Buick – B001E Buick

B001E Buick Code - Driver Seat Inboard Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B001E Buick indicates Driver Seat Inboard Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,123

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B001E Buick Description

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. There are 2 shorting bars used within the connector that will short the control circuits together when the connector is disconnected. This will help to prevent unwanted deployment of the air bag during servicing.

OBDII Code B001E Buick - Driver Seat Inboard Side Air Bag Deployment Loop - AutoCodes.com — B001E Buick Code - Driver Seat Inboard Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B001E Buick?

Faulty Driver Seat Inboard Side Air Bag
Driver Seat Inboard Side Air Bag harness is open or shorted
Driver Seat Inboard Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B001E Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B001E:01 Driver Seat Inboard Side Air Bag Deployment Loop Short to Battery
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B001E Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B001E Buick code?

Need more information on how to fix the B001E Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001E Buick code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001E Buick Code

1. What does OBDII code B001E for a Buick indicate?

The code B001E indicates a problem with the driver seat inboard side airbag deployment loop in a Buick vehicle.

2. What are the common symptoms of OBDII code B001E in a Buick?

Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the driver seat inboard side airbag system.

3. What could cause the OBDII code B001E to appear in a Buick?

Possible causes of the B001E code include a faulty inboard side airbag deployment loop, wiring issues, or a problem with the airbag control module.

4. How can I diagnose the OBDII code B001E in my Buick?

Diagnosing the B001E code typically involves using a diagnostic scanner to retrieve the specific fault codes, conducting a visual inspection of the airbag system components, and testing the airbag deployment loop.

5. Is it safe to drive with the OBDII code B001E in a Buick?

It is not recommended to drive with the B001E code present, as it indicates a potential issue with the driver seat inboard side airbag system, which could affect the vehicle's safety in the event of a collision.

6. Can I reset the OBDII code B001E in my Buick on my own?

While you can attempt to clear the code using a diagnostic scanner, it is crucial to address the underlying issue causing the code to prevent it from reoccurring.

7. How can I repair the OBDII code B001E in my Buick?

Repairing the B001E code may involve replacing the faulty driver seat inboard side airbag deployment loop, repairing any damaged wiring, or recalibrating the airbag control module.

8. Are there any safety precautions I should take when working on the driver seat inboard side airbag system in my Buick?

When working on the airbag system, it is essential to disconnect the vehicle's battery, follow proper airbag system handling procedures, and consider seeking assistance from a professional if you are not experienced with airbag systems.

9. How much does it cost to repair the OBDII code B001E in a Buick?

The cost of repairing the B001E code can vary depending on the specific issue causing the fault, the labor rates in your area, and whether you choose to address the problem yourself or take it to a professional mechanic.

10. Will the OBDII code B001E cause my Buick to fail a state inspection?

If the B001E code is related to the driver seat inboard side airbag system, it could potentially cause your Buick to fail a state inspection, as airbag systems are essential for vehicle safety and compliance with inspection regulations.