AutoCodes – GMC – B001E 2017 GMC Sierra

B001E 2017 GMC Sierra Code - Driver Seat Inboard Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B001E 2017 GMC Sierra indicates Driver Seat Inboard Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 326

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B001E 2017 GMC Sierra Description

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. There are 2 shorting bars used within the connector that will short the control circuits together when the connector is disconnected. This will help to prevent unwanted deployment of the air bag during servicing.

OBDII Code B001E 2017 GMC Sierra - Driver Seat Inboard Side Air Bag Deployment Loop - AutoCodes.com — B001E 2017 GMC Sierra Code - Driver Seat Inboard Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B001E 2017 GMC Sierra?

Faulty Driver Seat Inboard Side Air Bag
Driver Seat Inboard Side Air Bag harness is open or shorted
Driver Seat Inboard Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B001E 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B001E:01 Driver Seat Inboard Side Air Bag Deployment Loop Short to Battery
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B001E 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B001E 2017 GMC Sierra code?

Need more information on how to fix the B001E 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001E 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001E 2017 GMC Sierra Code

1. What does OBDII code B001E mean for a 2017 GMC Sierra?

When this code appears, it indicates an issue with the Driver Seat Inboard Side Air Bag Deployment Loop in your vehicle.

2. What are the common symptoms of OBDII code B001E in a 2017 GMC Sierra?

Common symptoms include the airbag warning light illuminating on the dashboard and potential problems with the driver seat airbag system.

3. What are possible causes of OBDII code B001E in a 2017 GMC Sierra?

Causes can include a faulty driver seat airbag deployment loop, damaged wiring, a malfunctioning airbag module, or issues with the airbag sensor.

4. How can I diagnose the OBDII code B001E in my 2017 GMC Sierra?

Diagnosis typically involves using a professional OBDII scanner to retrieve the specific fault code and then inspecting the driver seat airbag system components for any visible damage or issues.

5. Can I drive my 2017 GMC Sierra with OBDII code B001E?

It is not recommended to drive the vehicle with an active airbag fault code, as it can compromise the safety features of the driver seat airbag system.

6. How can I repair OBDII code B001E in my 2017 GMC Sierra?

Repairing this code may involve replacing the driver seat airbag deployment loop, repairing damaged wiring, resetting the airbag module, or addressing any underlying issues with the airbag system components.

7. Is it safe to reset the OBDII code B001E in a 2017 GMC Sierra on my own?

Resetting the code may temporarily clear the warning light, but it is crucial to address the root cause of the issue to ensure the proper functioning of the driver seat airbag system.

8. Are there any safety precautions to take when dealing with OBDII code B001E in a 2017 GMC Sierra?

When working on the airbag system, always disconnect the vehicle's battery and wait for a few minutes to allow any stored energy to dissipate before starting any repairs to prevent accidental airbag deployment.

9. Can a DIY enthusiast fix OBDII code B001E in a 2017 GMC Sierra?

While some minor repairs may be possible for experienced DIY individuals, it is recommended to consult a professional mechanic or authorized service center for accurate diagnosis and proper repair of airbag system faults.

10. How much does it cost to repair OBDII code B001E in a 2017 GMC Sierra?

The cost of repairs can vary depending on the specific issue causing the fault code. It is advisable to obtain a diagnostic assessment from a qualified technician to determine the exact repairs needed and associated costs.