AutoCodes – GMC – B001E 2016 GMC Sierra

B001E 2016 GMC Sierra Code - Driver Seat Inboard Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B001E 2016 GMC Sierra indicates Driver Seat Inboard Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 475

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B001E 2016 GMC Sierra Description

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. There are 2 shorting bars used within the connector that will short the control circuits together when the connector is disconnected. This will help to prevent unwanted deployment of the air bag during servicing.

OBDII Code B001E 2016 GMC Sierra - Driver Seat Inboard Side Air Bag Deployment Loop - AutoCodes.com — B001E 2016 GMC Sierra Code - Driver Seat Inboard Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B001E 2016 GMC Sierra?

Faulty Driver Seat Inboard Side Air Bag
Driver Seat Inboard Side Air Bag harness is open or shorted
Driver Seat Inboard Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B001E 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B001E:01 Driver Seat Inboard Side Air Bag Deployment Loop Short to Battery
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B001E 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B001E 2016 GMC Sierra code?

Need more information on how to fix the B001E 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001E 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001E 2016 GMC Sierra Code

1. What does the OBDII code B001E for a 2016 GMC Sierra relate to?

The B001E code pertains to the driver seat inboard side airbag deployment loop in a 2016 GMC Sierra.

2. What are some common symptoms of the B001E code in a 2016 GMC Sierra?

Common symptoms of the B001E code may include the airbag warning light illuminated on the dashboard and a potential message indicating an issue with the driver seat airbag system.

3. What are the possible causes of the B001E code in a 2016 GMC Sierra?

Potential causes of the B001E code can include a faulty driver seat airbag deployment loop, wiring issues, or a problem with the airbag control module.

4. How can I diagnose the B001E code in a 2016 GMC Sierra?

Diagnosing the B001E code typically involves using an OBDII scanner to retrieve the specific fault code and then conducting a visual inspection of the driver seat airbag components and wiring for any visible damage.

5. Is it safe to drive with the B001E code present in a 2016 GMC Sierra?

It is not recommended to drive with the B001E code present, as it indicates a potential issue with the driver seat airbag deployment system, which could affect its functionality in the event of a collision.

6. How can the B001E code in a 2016 GMC Sierra be repaired?

Repairing the B001E code may involve replacing the driver seat inboard side airbag deployment loop, repairing any damaged wiring, or resetting the airbag control module after addressing the underlying issue.

7. Can I reset the B001E code in a 2016 GMC Sierra myself?

While you can clear the B001E code with an OBDII scanner, it is essential to address the root cause of the issue to prevent the code from reoccurring and ensure the proper functioning of the driver seat airbag system.

8. Are there any recalls or service bulletins related to the B001E code for a 2016 GMC Sierra?

It is advisable to check with a GMC dealership or the manufacturer's website to see if there are any recalls or service bulletins addressing the B001E code for your specific 2016 Sierra model.

9. How much does it typically cost to repair the B001E code in a 2016 GMC Sierra?

The cost of repairing the B001E code can vary depending on the underlying issue, parts needed, and labor rates. It is recommended to obtain quotes from reputable repair shops or dealerships for an accurate estimate.

10. Can I prevent the B001E code from appearing in my 2016 GMC Sierra?

Regular maintenance, including inspections of the airbag system and addressing any warning lights promptly, can help prevent the occurrence of the B001E code in your 2016 GMC Sierra.