AutoCodes – GMC – B001E 2015 GMC Sierra

B001E 2015 GMC Sierra Code - Driver Seat Inboard Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B001E 2015 GMC Sierra indicates Driver Seat Inboard Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 336

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B001E 2015 GMC Sierra Description

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. There are 2 shorting bars used within the connector that will short the control circuits together when the connector is disconnected. This will help to prevent unwanted deployment of the air bag during servicing.

OBDII Code B001E 2015 GMC Sierra - Driver Seat Inboard Side Air Bag Deployment Loop - AutoCodes.com — B001E 2015 GMC Sierra Code - Driver Seat Inboard Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B001E 2015 GMC Sierra?

Faulty Driver Seat Inboard Side Air Bag
Driver Seat Inboard Side Air Bag harness is open or shorted
Driver Seat Inboard Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B001E 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B001E:01 Driver Seat Inboard Side Air Bag Deployment Loop Short to Battery
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B001E 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B001E 2015 GMC Sierra code?

Need more information on how to fix the B001E 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001E 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001E 2015 GMC Sierra Code

1. What does OBDII code B001E for a 2015 GMC Sierra indicate?

The B001E code specifically relates to the driver seat inboard side airbag deployment loop.

2. What are common symptoms of OBDII code B001E in a 2015 GMC Sierra?

Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the driver seat inboard side airbag during a collision.

3. What are possible causes of OBDII code B001E in a 2015 GMC Sierra?

Causes may include a faulty inboard side airbag deployment loop, damaged wiring, loose connections, or a malfunctioning airbag control module.

4. How can I diagnose the issue related to OBDII code B001E in my 2015 GMC Sierra?

To diagnose the problem, a thorough inspection of the inboard side airbag system, wiring, connectors, and control module is necessary. It is recommended to use a diagnostic scanner capable of reading airbag fault codes.

5. Can I continue to drive my 2015 GMC Sierra with OBDII code B001E present?

It is not advisable to drive the vehicle with an active airbag fault code, as it may compromise the safety features of the airbag system. Prompt attention and repair are recommended.

6. How can I repair OBDII code B001E on my 2015 GMC Sierra?

Repairing the issue may involve fixing or replacing the inboard side airbag deployment loop, repairing damaged wiring, securing loose connections, or resetting the airbag control module after addressing the underlying problem.

7. Is it safe to reset the OBDII code B001E without fixing the underlying issue?

Resetting the code without addressing the root cause can temporarily clear the warning light, but the issue may persist, potentially compromising the airbag system's functionality.

8. Can a DIY enthusiast fix OBDII code B001E in a 2015 GMC Sierra?

While some basic checks like inspecting connections can be done by a DIY enthusiast, diagnosing and repairing the inboard side airbag system should ideally be handled by a qualified technician due to the critical nature of airbag safety systems.

9. How much does it cost to repair OBDII code B001E in a 2015 GMC Sierra?

The cost of repair can vary based on the specific cause of the issue. It may involve replacing parts, fixing wiring, or addressing control module issues. Getting a diagnosis from a mechanic is crucial to determine the exact cost.

10. Can regular maintenance help prevent OBDII code B001E in a 2015 GMC Sierra?

Regular maintenance, including periodic inspections of the airbag system, can help identify potential issues early on and prevent codes like B001E from occurring.