B001E:0E Code - Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance
Quick Answer
During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B001E:0E indicates Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance.
- Common causes
- Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B001E:0E Description
What are the Possible Causes of the DTC B001E:0E?
- Faulty Driver Seat Inboard Side Air Bag
- Driver Seat Inboard Side Air Bag harness is open or shorted
- Driver Seat Inboard Side Air Bag circuit poor electrical connection
- Faulty Sensing and Diagnostic Module (SDM)
How to Fix the DTC B001E:0E?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B001E:0E code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B001E:0E code?
Need more information on how to fix the B001E:0E code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B001E:0E code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B001E:0E Code
1. What are the common symptoms of OBDII code B001E:0E related to the driver seat inboard side airbag deployment loop low resistance?
The common symptoms include the airbag warning light illuminating on the dashboard and a potential message indicating an issue with the driver seat airbag system.
2. What are the possible causes of OBDII code B001E:0E for the driver seat inboard side airbag deployment loop low resistance?
Potential causes may include a faulty inboard side airbag deployment loop, damaged wiring or connectors in the airbag system, or issues with the airbag control module.
3. How serious is the issue indicated by OBDII code B001E:0E for the driver seat inboard side airbag deployment loop low resistance?
This issue is considered serious as it pertains to the driver seat airbag system, which plays a critical role in occupant safety during a collision. It is recommended to address this problem promptly.
4. Can I continue driving with OBDII code B001E:0E present for the driver seat inboard side airbag deployment loop low resistance?
It is not advisable to continue driving with this code present, as it indicates a potential problem with the driver seat airbag system. Continuing to drive could compromise your safety in the event of a collision.
5. How can I diagnose and repair OBDII code B001E:0E for the driver seat inboard side airbag deployment loop low resistance?
Diagnosis typically involves inspecting the inboard side airbag deployment loop, checking wiring and connectors for damage, and using a diagnostic tool to reset the code after repairs are made. Professional help may be needed.
6. Are there any DIY repair tips for addressing OBDII code B001E:0E related to the driver seat inboard side airbag deployment loop low resistance?
While some basic inspections like checking for loose connections or visible damage can be done, it is recommended to seek professional assistance for diagnosing and repairing issues with the airbag system.
7. How much does it cost to repair OBDII code B001E:0E for the driver seat inboard side airbag deployment loop low resistance?
The cost of repair can vary depending on the specific cause of the issue. It may involve replacing the inboard side airbag deployment loop, repairing damaged wiring, or addressing issues with the airbag control module.
8. Can resetting the OBDII code B001E:0E for the driver seat inboard side airbag deployment loop low resistance fix the problem?
Simply resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the low resistance in the driver seat inboard side airbag deployment loop. Proper diagnosis and repair are necessary.
9. How often does OBDII code B001E:0E for the driver seat inboard side airbag deployment loop low resistance occur in vehicles?
The occurrence of this code can vary, but issues related to the driver seat inboard side airbag deployment loop low resistance are not uncommon in vehicles equipped with airbag systems.
10. Is it safe to drive my vehicle if OBDII code B001E:0E is indicating a problem with the driver seat inboard side airbag deployment loop?
It is not recommended to drive the vehicle if there is a known issue with the driver seat inboard side airbag deployment loop, as it could compromise the functionality of the airbag system in the event of a collision.
Discuss the causes and fixes for B001E:0E OBDII Code
Code B001E:0E comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
