B001E:04 Code - Driver Seat Inboard Side Air Bag Deployment Loop Open
Quick Answer
During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B001E:04 indicates Driver Seat Inboard Side Air Bag Deployment Loop Open.
- Common causes
- Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B001E:04 Description
What are the Possible Causes of the DTC B001E:04?
- Faulty Driver Seat Inboard Side Air Bag
- Driver Seat Inboard Side Air Bag harness is open or shorted
- Driver Seat Inboard Side Air Bag circuit poor electrical connection
- Faulty Sensing and Diagnostic Module (SDM)
How to Fix the DTC B001E:04?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B001E:04 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B001E:04 code?
Need more information on how to fix the B001E:04 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B001E:04 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B001E:04 Code
What does OBDII code B001E:04 mean?
Code B001E:04 indicates an open circuit in the driver seat's inboard side airbag deployment loop, preventing proper airbag function.
What are common symptoms of code B001E:04?
Typical symptoms include the airbag warning light illuminated on the dashboard and potential deactivation of the driver seat inboard side airbag.
What causes code B001E:04?
Common causes include damaged wiring, loose or corroded electrical connectors, or a faulty airbag module.
Can I drive my car with code B001E:04?
It’s not recommended to drive with this code active, as it may compromise airbag deployment during an accident.
How do I diagnose the cause of code B001E:04?
Diagnosis typically involves inspecting wiring and connectors for damage, using a multimeter to check for continuity, and testing the airbag module.
Is code B001E:04 a serious issue?
Yes, this code indicates a fault in the airbag system, which is critical for occupant safety in a collision.
How can I repair code B001E:04?
Repairs may include fixing or replacing damaged wiring, cleaning or tightening electrical connections, or replacing the airbag module.
Can code B001E:04 be caused by an accident?
Yes, an accident can damage airbag components or wiring, potentially triggering this code.
Do I need special tools to fix code B001E:04?
Yes, tools like a multimeter, OBDII scanner, and potentially manufacturer-specific diagnostic equipment may be required.
Should I reset the code after repairs?
Yes, once repairs are completed, clear the code using an OBDII scanner to confirm the issue is resolved.
Discuss the causes and fixes for B001E:04 OBDII Code
Code B001E:04 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
