B001E:02 Code - Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
Quick Answer
During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B001E:02 indicates Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground.
- Common causes
- Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B001E:02 Description
What are the Possible Causes of the DTC B001E:02?
- Faulty Driver Seat Inboard Side Air Bag
- Driver Seat Inboard Side Air Bag harness is open or shorted
- Driver Seat Inboard Side Air Bag circuit poor electrical connection
- Faulty Sensing and Diagnostic Module (SDM)
How to Fix the DTC B001E:02?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B001E:02 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B001E:02 code?
Need more information on how to fix the B001E:02 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B001E:02 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B001E:02 Code
What does the OBDII code B001E:02 mean?
1. The code B001E:02 indicates a short to ground in the driver seat inboard side airbag deployment loop circuit, which may compromise airbag functionality. 2.
What are the common symptoms of the B001E:02 code?
Symptoms may include an illuminated airbag warning light, the driver-side airbag not deploying in an accident, and potentially other safety system malfunctions. 3.
What causes the B001E:02 code?
Common causes include damaged or frayed wiring, a faulty airbag module, a defective clock spring, or a damaged connector in the airbag system. 4.
Is it safe to drive with the B001E:02 code active?
No, it is not safe to drive with this code active as it indicates a potential malfunction in the airbag system, which may fail to deploy in an accident. 5.
How can I diagnose the B001E:02 code?
Diagnose the code by inspecting the wiring and connectors for the driver seat inboard side airbag, checking for shorts to ground, and using a scan tool to verify fault codes. 6.
Can I reset the airbag light to fix the B001E:02 code?
No, simply resetting the airbag light will not fix the issue. The underlying short to ground in the airbag circuit must be repaired first. 7.
How much does it cost to repair the B001E:02 code?
Repair costs vary depending on the issue, but common repairs like wiring fixes or connector replacements typically range from $100 to $300. Replacing a module or clock spring may cost more. 8.
Can a faulty clock spring cause the B001E:02 code?
Yes, a faulty clock spring can cause this code if it disrupts the electrical connection to the airbag deployment loop. 9.
What tools are needed to fix the B001E:02 code?
You may need a multimeter to check for shorts, a scan tool for diagnostics, and basic hand tools to inspect and repair the wiring or connectors. 10.
Who should repair the B001E:02 code?
Since the airbag system is a critical safety component, repairs should be performed by a qualified mechanic or automotive technician familiar with airbag systems.
Discuss the causes and fixes for B001E:02 OBDII Code
Code B001E:02 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
