AutoCodes – GMC – B001B 2015 GMC Sierra

B001B 2015 GMC Sierra Code - Passenger Seat Belt Anchor Pretensioner Deployment Loop

Quick Answer

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Passenger Seat Belt Anchor Pretensioner, Passenger Seat Belt Anchor Pretensioner harness is open or shorted, Passenger Seat Belt Anchor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B001B 2015 GMC Sierra indicates Passenger Seat Belt Anchor Pretensioner Deployment Loop.
Common causes: Common causes include Faulty Passenger Seat Belt Anchor Pretensioner, Passenger Seat Belt Anchor Pretensioner harness is open or shorted, Passenger Seat Belt Anchor Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 315

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B001B 2015 GMC Sierra Description

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. The initiator is part of the seat belt pretensioner deployment loop. When the vehicle is involved in a collision of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) causes current to flow through the seat belt deployment loops to the initiator. Current passing through the initiator ignites the material in the canister producing a rapid generation of gas. The gas produced from this reaction deploys the seat belt pretensioners which removes all of the slack in the seat belts. Depending on the severity of the collision, the seat belt pretensioners may deploy without the frontal air bags deploying, or they will deploy immediately before the frontal air bags deploy. A shorting bar (if equipped) is located in the connector.

OBDII Code B001B 2015 GMC Sierra - Passenger Seat Belt Anchor Pretensioner Deployment Loop - AutoCodes.com — B001B 2015 GMC Sierra Code - Passenger Seat Belt Anchor Pretensioner Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B001B 2015 GMC Sierra?

Faulty Passenger Seat Belt Anchor Pretensioner
Passenger Seat Belt Anchor Pretensioner harness is open or shorted
Passenger Seat Belt Anchor Pretensioner circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B001B 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B001B:01 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Battery
B001B:02 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Ground
B001B:04 Passenger Seat Belt Anchor Pretensioner Deployment Loop Open
B001B:0D Passenger Seat Belt Anchor Pretensioner Deployment Loop High Resistance
B001B:0E Passenger Seat Belt Anchor Pretensioner Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B001B 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B001B 2015 GMC Sierra code?

Need more information on how to fix the B001B 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001B 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001B 2015 GMC Sierra Code

1. What does OBDII code B001B for the 2015 GMC Sierra indicate?

The B001B code specifically refers to the Passenger Seat Belt Anchor Pretensioner Deployment Loop.

2. What are common symptoms of OBDII code B001B in a 2015 GMC Sierra?

Common symptoms include the airbag warning light coming on the dashboard and potential issues with the passenger seat belt pretensioner system.

3. What can cause the OBDII code B001B to trigger in a 2015 GMC Sierra?

Possible causes include a faulty seat belt pretensioner, damaged wiring in the pretensioner system, or a problem with the airbag control module.

4. How serious is OBDII code B001B in a 2015 GMC Sierra?

This code indicates a problem with the passenger seat belt pretensioner system, which is a safety feature designed to protect occupants in the event of a collision. It is important to address this issue promptly.

5. Can I continue driving my 2015 GMC Sierra with OBDII code B001B present?

It is not recommended to drive the vehicle with an active airbag system fault code, as it may affect the proper deployment of the passenger seat belt pretensioner in the event of an accident.

6. How can I diagnose and repair OBDII code B001B in my 2015 GMC Sierra?

Diagnosing and repairing this code typically requires professional diagnostic equipment to pinpoint the exact cause of the issue. It is advisable to consult a qualified mechanic for an accurate diagnosis and repair.

7. Is it possible to reset or clear OBDII code B001B in a 2015 GMC Sierra?

Clearing the code may temporarily turn off the warning light, but it will not fix the underlying issue causing the code to trigger. It is important to address the root cause of the problem.

8. How much does it cost to repair OBDII code B001B in a 2015 GMC Sierra?

The cost of repairing this code can vary depending on the specific cause of the issue. It may involve replacing the seat belt pretensioner, repairing wiring, or addressing problems with the airbag control module.

9. Can a DIY enthusiast fix OBDII code B001B in a 2015 GMC Sierra?

While some basic automotive knowledge may help with diagnosing simple issues, addressing airbag system faults like this code is best left to professionals due to safety concerns and the complexity of the system.

10. How can I prevent OBDII code B001B from occurring in my 2015 GMC Sierra?

Regular maintenance, such as inspecting the seat belt pretensioner system during scheduled services, can help prevent issues that may trigger this code. Addressing any warning signs promptly can also help avoid more serious problems.