AutoCodes – Chevrolet – B001A 2018 Chevrolet Silverado

B001A 2018 Chevrolet Silverado Code - Driver Seat Belt Anchor Pretensioner Deployment Loop

Quick Answer

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Driver Seat Belt Anchor Pretensioner, Driver Seat Belt Anchor Pretensioner harness is open or shorted, Driver Seat Belt Anchor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B001A 2018 Chevrolet Silverado indicates Driver Seat Belt Anchor Pretensioner Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Belt Anchor Pretensioner, Driver Seat Belt Anchor Pretensioner harness is open or shorted, Driver Seat Belt Anchor Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 973

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B001A 2018 Chevrolet Silverado Description

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. The initiator is part of the seat belt pretensioner deployment loop. When the vehicle is involved in a collision of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) causes current to flow through the seat belt deployment loops to the initiator. Current passing through the initiator ignites the material in the canister producing a rapid generation of gas. The gas produced from this reaction deploys the seat belt pretensioners which removes all of the slack in the seat belts. Depending on the severity of the collision, the seat belt pretensioners may deploy without the frontal air bags deploying, or they will deploy immediately before the frontal air bags deploy. A shorting bar (if equipped) is located in the connector.

OBDII Code B001A 2018 Chevrolet Silverado - Driver Seat Belt Anchor Pretensioner Deployment Loop - AutoCodes.com — B001A 2018 Chevrolet Silverado Code - Driver Seat Belt Anchor Pretensioner Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B001A 2018 Chevrolet Silverado?

Faulty Driver Seat Belt Anchor Pretensioner
Driver Seat Belt Anchor Pretensioner harness is open or shorted
Driver Seat Belt Anchor Pretensioner circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B001A 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B001A:01 Driver Seat Belt Anchor Pretensioner Deployment Loop Short to Battery
B001A:02 Driver Seat Belt Anchor Pretensioner Deployment Loop Short to Ground
B001A:04 Driver Seat Belt Anchor Pretensioner Deployment Loop Open
B001A:0D Driver Seat Belt Anchor Pretensioner Deployment Loop High Resistance
B001A:0E Driver Seat Belt Anchor Pretensioner Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B001A 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B001A 2018 Chevrolet Silverado code?

Need more information on how to fix the B001A 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001A 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001A 2018 Chevrolet Silverado Code

1. What does OBDII code B001A mean on a 2018 Chevrolet Silverado?

The code B001A indicates a problem with the driver seat belt anchor pretensioner deployment loop.

2. What are the common symptoms of OBDII code B001A in a 2018 Chevrolet Silverado?

Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the driver seat belt system.

3. What are some possible causes of OBDII code B001A in a 2018 Chevrolet Silverado?

Causes can include a faulty seat belt anchor pretensioner, damaged wiring in the deployment loop circuit, or a malfunctioning airbag control module.

4. How can I diagnose the issue related to OBDII code B001A on my 2018 Chevrolet Silverado?

To diagnose the problem, it's recommended to use an OBDII scanner to retrieve the specific trouble code, inspect the seat belt anchor pretensioner connections, and check the wiring for any visible damage.

5. Can I continue driving my 2018 Chevrolet Silverado with OBDII code B001A?

It's not advisable to drive the vehicle with this code present, as it indicates a potential safety issue with the driver seat belt system and airbag deployment.

6. How can I repair OBDII code B001A on my 2018 Chevrolet Silverado?

Repairing the issue may involve replacing the faulty seat belt anchor pretensioner, repairing damaged wiring, or reprogramming the airbag control module, depending on the root cause of the problem.

7. Is it safe to reset the OBDII code B001A without fixing the underlying issue?

Resetting the code without addressing the root cause can temporarily clear the warning light, but the safety concern with the seat belt system will remain unresolved.

8. Can a DIY enthusiast fix OBDII code B001A on a 2018 Chevrolet Silverado?

While some basic troubleshooting steps can be performed by a DIY enthusiast, repairing the seat belt anchor pretensioner or dealing with complex wiring issues may require professional expertise.

9. How much does it typically cost to repair OBDII code B001A on a 2018 Chevrolet Silverado?

The cost of repair can vary depending on the specific issue, but it may involve parts and labor expenses ranging from a few hundred to over a thousand dollars.

10. How often does OBDII code B001A occur in 2018 Chevrolet Silverado vehicles?

While the frequency of this specific OBDII code may vary, it's essential to address it promptly to ensure the proper functioning of the driver seat belt system and airbag deployment in the vehicle.