AutoCodes – Chevrolet – B001A 2016 Chevrolet Silverado

B001A 2016 Chevrolet Silverado Code - Driver Seat Belt Anchor Pretensioner Deployment Loop

Quick Answer

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Driver Seat Belt Anchor Pretensioner, Driver Seat Belt Anchor Pretensioner harness is open or shorted, Driver Seat Belt Anchor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B001A 2016 Chevrolet Silverado indicates Driver Seat Belt Anchor Pretensioner Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Belt Anchor Pretensioner, Driver Seat Belt Anchor Pretensioner harness is open or shorted, Driver Seat Belt Anchor Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,072

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B001A 2016 Chevrolet Silverado Description

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. The initiator is part of the seat belt pretensioner deployment loop. When the vehicle is involved in a collision of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) causes current to flow through the seat belt deployment loops to the initiator. Current passing through the initiator ignites the material in the canister producing a rapid generation of gas. The gas produced from this reaction deploys the seat belt pretensioners which removes all of the slack in the seat belts. Depending on the severity of the collision, the seat belt pretensioners may deploy without the frontal air bags deploying, or they will deploy immediately before the frontal air bags deploy. A shorting bar (if equipped) is located in the connector.

OBDII Code B001A 2016 Chevrolet Silverado - Driver Seat Belt Anchor Pretensioner Deployment Loop - AutoCodes.com — B001A 2016 Chevrolet Silverado Code - Driver Seat Belt Anchor Pretensioner Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B001A 2016 Chevrolet Silverado?

Faulty Driver Seat Belt Anchor Pretensioner
Driver Seat Belt Anchor Pretensioner harness is open or shorted
Driver Seat Belt Anchor Pretensioner circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B001A 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B001A:01 Driver Seat Belt Anchor Pretensioner Deployment Loop Short to Battery
B001A:02 Driver Seat Belt Anchor Pretensioner Deployment Loop Short to Ground
B001A:04 Driver Seat Belt Anchor Pretensioner Deployment Loop Open
B001A:0D Driver Seat Belt Anchor Pretensioner Deployment Loop High Resistance
B001A:0E Driver Seat Belt Anchor Pretensioner Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B001A 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B001A 2016 Chevrolet Silverado code?

Need more information on how to fix the B001A 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001A 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001A 2016 Chevrolet Silverado Code

1. What does the OBDII code B001A on a 2016 Chevrolet Silverado indicate?

The code B001A relates to the Driver Seat Belt Anchor Pretensioner Deployment Loop on a 2016 Chevrolet Silverado.

2. What are the common symptoms of OBDII code B001A on a 2016 Chevrolet Silverado?

Common symptoms of code B001A may include the airbag warning light illuminating on the dashboard and potential issues with the driver's seat belt pretensioner.

3. What can cause the OBDII code B001A to trigger on a 2016 Chevrolet Silverado?

The code B001A is often triggered by a fault in the driver seat belt anchor pretensioner deployment loop, which could be due to a faulty pretensioner or wiring issue.

4. How can I diagnose the OBDII code B001A on my 2016 Chevrolet Silverado?

Diagnosing code B001A typically involves using a diagnostic scanner to read the code, inspecting the driver seat belt pretensioner system, and checking for any visible damage or loose connections.

5. Is it safe to drive my 2016 Chevrolet Silverado with the OBDII code B001A present?

It is not recommended to drive the vehicle with the code B001A active, as it indicates a potential issue with the driver seat belt pretensioner system, which is a crucial safety component.

6. Can I reset the OBDII code B001A on my 2016 Chevrolet Silverado myself?

While you can clear the code temporarily with a diagnostic scanner, it is essential to address the underlying issue causing the code to prevent it from reoccurring.

7. How much does it typically cost to repair the OBDII code B001A on a 2016 Chevrolet Silverado?

The cost of repairing code B001A can vary depending on the specific issue, but it may involve replacing the driver seat belt pretensioner or fixing any wiring problems, which could range from a few hundred to over a thousand dollars.

8. Are there any DIY repair tips for fixing the OBDII code B001A on a 2016 Chevrolet Silverado?

DIY repair for code B001A is not recommended due to the safety implications involved. It is best to have a qualified technician inspect and repair the driver seat belt pretensioner system.

9. How long does it typically take to repair the OBDII code B001A issue on a 2016 Chevrolet Silverado?

The repair time for code B001A can vary based on the exact cause of the problem, but it may take a few hours to a full day to diagnose and fix the issue properly.

10. Can the OBDII code B001A on a 2016 Chevrolet Silverado affect the overall safety of the vehicle?

Yes, code B001A directly relates to the driver seat belt pretensioner system, which is crucial for occupant safety in the event of a collision. It is essential to address this code promptly to ensure the vehicle's safety systems are functioning correctly.