AutoCodes – Generic – B0015:0E

B0015:0E Code - Driver Seat Belt Retractor Pretensioner Deployment Loop Low Resistance

Quick Answer

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Driver Seat Belt Retractor Pretensioner, Driver Seat Belt Retractor Pretensioner harness is open or shorted, Driver Seat Belt Retractor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0015:0E indicates Driver Seat Belt Retractor Pretensioner Deployment Loop Low Resistance.
Common causes: Common causes include Faulty Driver Seat Belt Retractor Pretensioner, Driver Seat Belt Retractor Pretensioner harness is open or shorted, Driver Seat Belt Retractor Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 958

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0015:0E Description

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. The initiator is part of the seat belt pretensioner deployment loop. When the vehicle is involved in a collision of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) causes current to flow through the seat belt deployment loops to the initiator. Current passing through the initiator ignites the material in the canister producing a rapid generation of gas. The gas produced from this reaction deploys the seat belt pretensioners which removes all of the slack in the seat belts. Depending on the severity of the collision, the seat belt pretensioners may deploy without the frontal air bags deploying, or they will deploy immediately before the frontal air bags deploy. A shorting bar (if equipped) is located in the connector. The Diagnostic Trouble Code (DTC) will be set if the pretensioner deployment loop resistance is less than 1.4 â„¦ for 2 s.

OBDII Code B0015:0E - Driver Seat Belt Retractor Pretensioner Deployment Loop Low Resistance - AutoCodes.com — B0015:0E Code - Driver Seat Belt Retractor Pretensioner Deployment Loop Low Resistance

What does this mean?

What are the Possible Causes of the DTC B0015:0E?

Faulty Driver Seat Belt Retractor Pretensioner
Driver Seat Belt Retractor Pretensioner harness is open or shorted
Driver Seat Belt Retractor Pretensioner circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0015:0E?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0015:01 Driver Seat Belt Retractor Pretensioner Deployment Loop Short to Battery
B0015:02 Driver Seat Belt Retractor Pretensioner Deployment Loop Short to Ground
B0015:04 Driver Seat Belt Retractor Pretensioner Deployment Loop Open
B0015:0D Driver Seat Belt Retractor Pretensioner Deployment Loop High Resistance
B0015:0E Driver Seat Belt Retractor Pretensioner Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0015:0E code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0015:0E code?

Need more information on how to fix the B0015:0E code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0015:0E code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0015:0E Code

1. What are the common symptoms of OBDII code B0015:0E (Driver Seat Belt Retractor Pretensioner Deployment Loop Low Resistance)?

The common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the driver's seat belt pretensioner system.

2. What can cause the OBDII code B0015:0E to be triggered?

This code is usually triggered by a low resistance in the driver seat belt retractor pretensioner deployment loop, which can be caused by damaged wiring, faulty connectors, or a malfunctioning pretensioner unit.

3. How serious is the OBDII code B0015:0E related to the driver seat belt retractor pretensioner deployment loop low resistance?

This code indicates a potential safety issue as it relates to the driver's seat belt pretensioner system. It is crucial to address this problem promptly to ensure proper functioning of the safety restraint system in case of a collision.

4. What should I do if I encounter the OBDII code B0015:0E in my vehicle?

If you encounter this code, it is recommended to have the vehicle inspected by a qualified mechanic or technician to diagnose the root cause of the low resistance in the driver seat belt retractor pretensioner deployment loop.

5. Can I continue driving my vehicle with the OBDII code B0015:0E present?

While you may be able to drive the vehicle with this code present, it is not advisable as it indicates a potential safety issue with the driver's seat belt pretensioner system. It is best to address the problem promptly.

6. How can I repair the OBDII code B0015:0E related to the driver seat belt retractor pretensioner deployment loop low resistance?

Repairing this code typically involves inspecting and repairing any damaged wiring, checking and fixing faulty connectors, and potentially replacing the driver seat belt pretensioner unit if necessary.

7. Are there any DIY tips for troubleshooting the OBDII code B0015:0E?

While basic troubleshooting like checking for loose connections or damaged wiring may be possible for some DIY enthusiasts, it is generally recommended to have a professional diagnose and repair this code due to its safety implications.

8. How much does it cost to fix the OBDII code B0015:0E issue?

The cost of fixing this issue can vary depending on the root cause of the problem, the extent of the repairs needed, and labor rates in your area. It is best to consult with a mechanic for an accurate estimate.

9. Can the OBDII code B0015:0E be a false alarm or intermittent issue?

While it is possible for some codes to be triggered intermittently or due to temporary glitches, the OBDII code B0015:0E related to low resistance in the driver seat belt retractor pretensioner deployment loop should not be ignored and requires attention.

10. How can I prevent the OBDII code B0015:0E from reoccurring in the future?

Regular maintenance and inspections of the vehicle's safety systems, including the seat belt pretensioner system, can help prevent issues like low resistance in the driver seat belt retractor deployment loop.