B0015:04 Code - Driver Seat Belt Retractor Pretensioner Deployment Loop Open
Quick Answer
The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Driver Seat Belt Retractor Pretensioner, Driver Seat Belt Retractor Pretensioner harness is open or shorted, Driver Seat Belt Retractor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0015:04 indicates Driver Seat Belt Retractor Pretensioner Deployment Loop Open.
- Common causes
- Common causes include Faulty Driver Seat Belt Retractor Pretensioner, Driver Seat Belt Retractor Pretensioner harness is open or shorted, Driver Seat Belt Retractor Pretensioner circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0015:04 Description
What are the Possible Causes of the DTC B0015:04?
- Faulty Driver Seat Belt Retractor Pretensioner
- Driver Seat Belt Retractor Pretensioner harness is open or shorted
- Driver Seat Belt Retractor Pretensioner circuit poor electrical connection
- Faulty Sensing and Diagnostic Module (SDM)
How to Fix the DTC B0015:04?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0015:02 Driver Seat Belt Retractor Pretensioner Deployment Loop Short to Ground
B0015:04 Driver Seat Belt Retractor Pretensioner Deployment Loop Open
B0015:0D Driver Seat Belt Retractor Pretensioner Deployment Loop High Resistance
B0015:0E Driver Seat Belt Retractor Pretensioner Deployment Loop Low Resistance
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0015:04 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0015:04 code?
Need more information on how to fix the B0015:04 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0015:04 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0015:04 Code
1. What are the common symptoms of OBDII code B0015:04 related to the Driver Seat Belt Retractor Pretensioner Deployment Loop Open?
- The most common symptom is the illumination of the airbag warning light on the dashboard.
2. What are the potential causes of OBDII code B0015:04, indicating a Driver Seat Belt Retractor Pretensioner Deployment Loop Open?
- The code may be triggered by a faulty seat belt pretensioner, damaged wiring in the seat belt system, or a poor connection.
3. How serious is OBDII code B0015:04, signaling a Driver Seat Belt Retractor Pretensioner Deployment Loop Open?
- This code indicates a potential issue with the seat belt pretensioner system, which may affect its proper operation in the event of a collision. It should be addressed promptly.
4. Can I continue driving with OBDII code B0015:04 present, indicating a Driver Seat Belt Retractor Pretensioner Deployment Loop Open?
- It is not recommended to continue driving with this code active as it may compromise the effectiveness of the seat belt pretensioner in an accident.
5. How can I diagnose OBDII code B0015:04, showing a Driver Seat Belt Retractor Pretensioner Deployment Loop Open?
- Diagnosis typically involves using a scan tool to retrieve the code, inspecting the seat belt system for visible damage, and testing the wiring for continuity.
6. Are there any DIY repair tips for addressing OBDII code B0015:04 related to Driver Seat Belt Retractor Pretensioner Deployment Loop Open?
- DIY repair for this code may involve checking and securing the seat belt connections, inspecting for damaged wiring, or replacing the seat belt pretensioner if necessary.
7. What should I do if I encounter OBDII code B0015:04, indicating a Driver Seat Belt Retractor Pretensioner Deployment Loop Open?
- It is recommended to have the issue diagnosed and repaired by a qualified technician to ensure the seat belt system functions properly in case of an accident.
8. Is resetting the OBDII code B0015:04, showing a Driver Seat Belt Retractor Pretensioner Deployment Loop Open, a sufficient solution?
- Resetting the code may temporarily turn off the warning light, but it will not address the underlying issue causing the code. Proper diagnosis and repair are necessary.
9. Can weather conditions or temperature changes trigger OBDII code B0015:04 related to a Driver Seat Belt Retractor Pretensioner Deployment Loop Open?
- While extreme weather conditions may not directly cause this code, they can sometimes exacerbate existing issues within the seat belt system, leading to its activation.
10. How much does it typically cost to repair OBDII code B0015:04, indicating a Driver Seat Belt Retractor Pretensioner Deployment Loop Open?
- The cost of repair can vary depending on the specific cause of the issue, but it may involve replacing the seat belt pretensioner or repairing damaged wiring, ranging from a few hundred to over a thousand dollars.
Discuss the causes and fixes for B0015:04 OBDII Code
Code B0015:04 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
