B0015:02 Code - Driver Seat Belt Retractor Pretensioner Deployment Loop Short to Ground
Quick Answer
The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Driver Seat Belt Retractor Pretensioner, Driver Seat Belt Retractor Pretensioner harness is open or shorted, Driver Seat Belt Retractor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0015:02 indicates Driver Seat Belt Retractor Pretensioner Deployment Loop Short to Ground.
- Common causes
- Common causes include Faulty Driver Seat Belt Retractor Pretensioner, Driver Seat Belt Retractor Pretensioner harness is open or shorted, Driver Seat Belt Retractor Pretensioner circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0015:02 Description
What are the Possible Causes of the DTC B0015:02?
- Faulty Driver Seat Belt Retractor Pretensioner
- Driver Seat Belt Retractor Pretensioner harness is open or shorted
- Driver Seat Belt Retractor Pretensioner circuit poor electrical connection
- Faulty Sensing and Diagnostic Module (SDM)
How to Fix the DTC B0015:02?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0015:02 Driver Seat Belt Retractor Pretensioner Deployment Loop Short to Ground
B0015:04 Driver Seat Belt Retractor Pretensioner Deployment Loop Open
B0015:0D Driver Seat Belt Retractor Pretensioner Deployment Loop High Resistance
B0015:0E Driver Seat Belt Retractor Pretensioner Deployment Loop Low Resistance
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0015:02 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0015:02 code?
Need more information on how to fix the B0015:02 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0015:02 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0015:02 Code
1. What are common symptoms of OBDII code B0015:02?
The common symptoms of OBDII code B0015:02 include the airbag warning light staying illuminated on the dashboard and a possible loss of functionality in the driver seat belt retractor pretensioner.
2. What does the code B0015:02 indicate?
The code B0015:02 indicates a driver seat belt retractor pretensioner deployment loop short to ground, which means there is an electrical issue causing a short circuit in the system.
3. What are the possible causes of OBDII code B0015:02?
Possible causes of OBDII code B0015:02 include damaged wiring or connectors in the seat belt pretensioner circuit, a faulty seat belt pretensioner, or a malfunctioning airbag control module.
4. How can I diagnose OBDII code B0015:02?
To diagnose OBDII code B0015:02, a comprehensive inspection of the seat belt pretensioner circuit, wiring, connectors, and airbag control module is necessary. Using a diagnostic scanner to read and clear the code can help identify the exact issue.
5. Is it safe to drive with OBDII code B0015:02?
It is not recommended to drive with OBDII code B0015:02 present, as it indicates a potential issue with the driver seat belt pretensioner system, which could affect the proper functioning of the seat belt in the event of a collision.
6. How can I repair OBDII code B0015:02?
Repairing OBDII code B0015:02 involves identifying and addressing the root cause of the short to ground in the driver seat belt retractor pretensioner deployment loop. This may require repairing or replacing damaged wiring, connectors, or components in the system.
7. Can I reset OBDII code B0015:02 without fixing the issue?
While you can clear the code temporarily with a diagnostic scanner, it is important to address the underlying problem causing OBDII code B0015:02. Ignoring the issue may compromise the safety features of the seat belt pretensioner system.
8. How much does it cost to fix OBDII code B0015:02?
The cost to fix OBDII code B0015:02 can vary depending on the specific cause of the issue and the extent of the repairs needed. It is recommended to consult with a professional mechanic for an accurate diagnosis and cost estimate.
9. Can OBDII code B0015:02 be triggered by a loose connection?
Yes, OBDII code B0015:02 can be triggered by a loose or poor connection in the driver seat belt retractor pretensioner deployment loop, causing a short to ground. Checking and securing all connections is a good initial troubleshooting step.
10. How often should I check for OBDII code B0015:02?
Regular maintenance checks and inspections of the airbag system, including the seat belt pretensioner components, are recommended to detect issues like OBDII code B0015:02 early on. If the airbag warning light illuminates, immediate attention is needed.
Discuss the causes and fixes for B0015:02 OBDII Code
Code B0015:02 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
