AutoCodes – Chevrolet – B0014 2016 Chevrolet Silverado

B0014 2016 Chevrolet Silverado Code - Driver Seat Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0014 2016 Chevrolet Silverado indicates Driver Seat Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 828

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0014 2016 Chevrolet Silverado Description

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. A shorting bar is located in the electrical connector of the side impact module. The side impact module high control circuit and low control circuit are shorted together by the shorting bar when the electrical connector is disconnected. The shorting bar helps prevent unwanted deployment of the inflator module during servicing. The SDM performs a continuous diagnostic test on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If the results of any deployment loop circuit test are below specifications the code B0014 and the appropriate symptom byte will be set.

OBDII Code B0014 2016 Chevrolet Silverado - Driver Seat Side Air Bag Deployment Loop - AutoCodes.com — B0014 2016 Chevrolet Silverado Code - Driver Seat Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B0014 2016 Chevrolet Silverado?

Faulty Driver Seat Side Air Bag
Driver Seat Side Air Bag harness is open or shorted
Driver Seat Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0014 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0014:01 Driver Seat Side Air Bag Deployment Loop Short to Battery
B0014:02 Driver Seat Side Air Bag Deployment Loop Short to Ground
B0014:04 Driver Seat Side Air Bag Deployment Loop Open
B0014:0D Driver Seat Side Air Bag Deployment Loop High Resistance
B0014:0E Driver Seat Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0014 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0014 2016 Chevrolet Silverado code?

Need more information on how to fix the B0014 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0014 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0014 2016 Chevrolet Silverado Code

1. What does OBDII code B0014 in a 2016 Chevrolet Silverado indicate?

The B0014 code specifically relates to the driver seat side airbag deployment loop circuit.

2. What are the common symptoms of a B0014 code in a 2016 Chevrolet Silverado?

Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the driver seat side airbag during a collision.

3. What are the possible causes of the B0014 code in a 2016 Chevrolet Silverado?

Potential causes of the B0014 code include damaged wiring, faulty connectors, a malfunctioning airbag module, or issues with the airbag deployment loop circuit.

4. How can I diagnose the B0014 code in my 2016 Chevrolet Silverado?

Diagnosing the B0014 code typically involves using an OBDII scanner to retrieve the specific fault code and then inspecting the wiring, connectors, and components related to the driver seat side airbag deployment loop.

5. Can I continue to drive my 2016 Chevrolet Silverado with a B0014 code?

It is not recommended to drive with an active B0014 code, as it indicates a potential issue with the driver seat side airbag system, which could compromise your safety in the event of a collision.

6. How can I repair a B0014 code in my 2016 Chevrolet Silverado?

Repairing a B0014 code may involve repairing or replacing damaged wiring, connectors, or components in the driver seat side airbag deployment loop circuit, or resetting the airbag module.

7. Can I reset the B0014 code in my 2016 Chevrolet Silverado myself?

While you can attempt to clear the B0014 code with an OBDII scanner, it is crucial to address the underlying issue causing the code to prevent it from reoccurring and ensure the proper functioning of the airbag system.

8. Is it safe to reset the B0014 code without fixing the underlying problem in my 2016 Chevrolet Silverado?

Resetting the B0014 code without addressing the root cause can temporarily clear the warning light but may leave the airbag system compromised, potentially affecting its performance in a collision.

9. Are there any recalls or service bulletins related to the B0014 code in a 2016 Chevrolet Silverado?

It is advisable to check with a Chevrolet dealership or the manufacturer's website to see if there are any recalls or service bulletins related to the B0014 code in your specific vehicle.

10. How can I prevent the B0014 code from occurring in my 2016 Chevrolet Silverado?

Regular maintenance and inspection of the airbag system, including checking for wiring damage and ensuring proper connections, can help prevent issues like the B0014 code from occurring in your Chevrolet Silverado.