AutoCodesChevrolet – B0014 2015 Chevrolet Silverado

B0014 2015 Chevrolet Silverado Code - Driver Seat Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B0014 2015 Chevrolet Silverado indicates Driver Seat Side Air Bag Deployment Loop.
Common causes
Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 621
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 09, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0014 2015 Chevrolet Silverado Description

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. A shorting bar is located in the electrical connector of the side impact module. The side impact module high control circuit and low control circuit are shorted together by the shorting bar when the electrical connector is disconnected. The shorting bar helps prevent unwanted deployment of the inflator module during servicing. The SDM performs a continuous diagnostic test on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If the results of any deployment loop circuit test are below specifications the code B0014 and the appropriate symptom byte will be set.
OBDII Code B0014 2015 Chevrolet Silverado - Driver Seat Side Air Bag Deployment Loop - AutoCodes.com
B0014 2015 Chevrolet Silverado Code - Driver Seat Side Air Bag Deployment Loop

What are the Possible Causes of the DTC B0014 2015 Chevrolet Silverado?

  • Faulty Driver Seat Side Air Bag
  • Driver Seat Side Air Bag harness is open or shorted
  • Driver Seat Side Air Bag circuit poor electrical connection
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0014 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0014 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0014 2015 Chevrolet Silverado code?

Need more information on how to fix the B0014 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0014 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0014 2015 Chevrolet Silverado Code

1. What does OBDII code B0014 mean for a 2015 Chevrolet Silverado?

The B0014 code indicates a problem with the driver seat side airbag deployment loop circuit.

2. What are common symptoms of OBDII code B0014 in a 2015 Chevrolet Silverado?

Common symptoms include the airbag warning light on the dashboard illuminating and potential non-deployment of the driver seat side airbag in the event of a crash.

3. What are possible causes of OBDII code B0014 in a 2015 Chevrolet Silverado?

Potential causes of the B0014 code include a faulty deployment loop circuit, damaged wiring, loose connections, or a malfunctioning airbag module.

4. How can I diagnose the issue causing OBDII code B0014 in my 2015 Chevrolet Silverado?

Diagnosing the problem typically involves using an OBDII scanner to retrieve the specific fault code, inspecting the deployment loop circuit, checking wiring and connections, and testing the airbag module for proper function.

5. Is it safe to drive my 2015 Chevrolet Silverado with OBDII code B0014?

It is not recommended to drive the vehicle with an active airbag fault code, as the driver seat side airbag may not deploy in the event of an accident, potentially compromising safety.

6. How can I repair OBDII code B0014 in my 2015 Chevrolet Silverado?

Repairing the B0014 code may involve repairing or replacing the driver seat side airbag deployment loop circuit, fixing damaged wiring, securing loose connections, or replacing a faulty airbag module.

7. Can I reset the OBDII code B0014 in my 2015 Chevrolet Silverado by disconnecting the battery?

While disconnecting the battery may clear the code temporarily, it is crucial to diagnose and address the underlying issue causing the fault code to prevent it from reoccurring.

8. Are there any recalls or technical service bulletins related to OBDII code B0014 in the 2015 Chevrolet Silverado?

It is advisable to check with a Chevrolet dealership or automotive service center to inquire about any recalls or technical service bulletins related to the B0014 code in the 2015 Silverado.

9. How much does it cost to repair OBDII code B0014 in a 2015 Chevrolet Silverado?

The cost of repairing the B0014 code can vary depending on the specific issue causing the fault, the required parts, and labor costs. It is recommended to obtain estimates from qualified mechanics or service centers.

10. Can I fix OBDII code B0014 in my 2015 Chevrolet Silverado myself, or should I seek professional help?

While some DIY enthusiasts may be able to address simple wiring issues, diagnosing and repairing the driver seat side airbag deployment loop circuit related to the B0014 code often requires specialized knowledge and tools, so seeking professional help is advisable.

Discuss the causes and fixes for B0014 2015 Chevrolet Silverado OBDII Code

Code B0014 2015 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play