B0014:0E Code - Driver Seat Side Air Bag Deployment Loop Low Resistance
Quick Answer
During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0014:0E indicates Driver Seat Side Air Bag Deployment Loop Low Resistance.
- Common causes
- Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0014:0E Description
What are the Possible Causes of the DTC B0014:0E?
- Faulty Driver Seat Side Air Bag
- Driver Seat Side Air Bag harness is open or shorted
- Driver Seat Side Air Bag circuit poor electrical connection
- Faulty Sensing and Diagnostic Module (SDM)
How to Fix the DTC B0014:0E?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0014:02 Driver Seat Side Air Bag Deployment Loop Short to Ground
B0014:04 Driver Seat Side Air Bag Deployment Loop Open
B0014:0D Driver Seat Side Air Bag Deployment Loop High Resistance
B0014:0E Driver Seat Side Air Bag Deployment Loop Low Resistance
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0014:0E code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0014:0E code?
Need more information on how to fix the B0014:0E code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0014:0E code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0014:0E Code
1. What are the common symptoms of OBDII code B0014:0E?
- The common symptoms include the airbag warning light illuminated on the dashboard and possible issues with the driver seat side airbag deployment system.
2. What does the OBDII code B0014:0E indicate?
- The code indicates low resistance in the driver seat side airbag deployment loop, which can affect the proper operation of the airbag system.
3. What are the potential causes of OBDII code B0014:0E?
- Common causes include damaged wiring or connectors in the deployment loop, a faulty seat airbag module, or issues with the airbag control module.
4. How can I diagnose the issue related to OBDII code B0014:0E?
- Diagnosis typically involves inspecting the wiring and connectors in the driver seat side airbag system, testing the resistance levels, and using a diagnostic scanner to retrieve fault codes.
5. How can I repair OBDII code B0014:0E?
- Repair options may include repairing or replacing damaged wiring, connectors, or components in the driver seat side airbag system, resetting the airbag system, and clearing the fault codes.
6. Can driving with OBDII code B0014:0E pose any risks?
- Driving with this code may pose a risk as the driver seat side airbag may not deploy properly in the event of a collision, potentially compromising occupant safety.
7. Can I reset the OBDII code B0014:0E without fixing the underlying issue?
- While you can clear the fault code temporarily, it is recommended to address the root cause to ensure the proper functioning of the driver seat side airbag system.
8. How much does it cost to repair OBDII code B0014:0E?
- Repair costs can vary depending on the specific issue causing the code, but it may involve labor costs for diagnosis and repair, as well as the cost of any necessary replacement parts.
9. Is it safe to continue driving with the airbag warning light on due to OBDII code B0014:0E?
- It is not recommended to continue driving with the airbag warning light on, as it indicates a potential issue with the airbag system that could affect its proper operation in an accident.
10. Can I fix OBDII code B0014:0E myself, or do I need to take it to a professional mechanic?
- While some DIY enthusiasts may be able to address simple wiring or connector issues, it is generally recommended to have a professional mechanic diagnose and repair problems related to airbag systems for safety reasons.
Discuss the causes and fixes for B0014:0E OBDII Code
Code B0014:0E comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
