AutoCodes – Generic – B0014:0D

B0014:0D Code - Driver Seat Side Air Bag Deployment Loop High Resistance

Quick Answer

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0014:0D indicates Driver Seat Side Air Bag Deployment Loop High Resistance.
Common causes: Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,551

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0014:0D Description

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. A shorting bar is located in the electrical connector of the side impact module. The side impact module high control circuit and low control circuit are shorted together by the shorting bar when the electrical connector is disconnected. The shorting bar helps prevent unwanted deployment of the inflator module during servicing. The SDM performs a continuous diagnostic test on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If the results of any deployment loop circuit test are below specifications the code B0014 and the appropriate symptom byte will be set. The Diagnostic Trouble Code (DTC) will be set when the air bag deployment loop resistance is greater than 4.2 â„¦ for 2 seconds.

OBDII Code B0014:0D - Driver Seat Side Air Bag Deployment Loop High Resistance - AutoCodes.com — B0014:0D Code - Driver Seat Side Air Bag Deployment Loop High Resistance

What does this mean?

What are the Possible Causes of the DTC B0014:0D?

Faulty Driver Seat Side Air Bag
Driver Seat Side Air Bag harness is open or shorted
Driver Seat Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0014:0D?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0014:01 Driver Seat Side Air Bag Deployment Loop Short to Battery
B0014:02 Driver Seat Side Air Bag Deployment Loop Short to Ground
B0014:04 Driver Seat Side Air Bag Deployment Loop Open
B0014:0D Driver Seat Side Air Bag Deployment Loop High Resistance
B0014:0E Driver Seat Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0014:0D code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0014:0D code?

Need more information on how to fix the B0014:0D code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0014:0D code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0014:0D Code

1. What are the common symptoms of OBDII code B0014:0D (Driver Seat Side Air Bag Deployment Loop High Resistance)?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the driver seat side airbag during a collision.

2. What are the possible causes of OBDII code B0014:0D?

- The code B0014:0D typically indicates high resistance in the driver seat side airbag deployment loop, which can be caused by issues such as a faulty airbag module, damaged wiring, or a defective seat side airbag.

3. How serious is OBDII code B0014:0D (Driver Seat Side Air Bag Deployment Loop High Resistance)?

- This code is considered serious because it signifies a potential problem with the driver seat side airbag system, which may affect its proper deployment in the event of a collision.

4. Can I continue driving with OBDII code B0014:0D present?

- It is not recommended to drive with the OBDII code B0014:0D active, as it indicates a fault in the driver seat side airbag system that could compromise safety in the event of an accident.

5. How can I diagnose and repair OBDII code B0014:0D?

- Diagnosis involves using a scan tool to retrieve the specific fault code, followed by inspecting the driver seat side airbag system for issues like damaged wiring, a faulty airbag module, or a defective side airbag. Repair typically involves replacing the damaged components and clearing the code.

6. Are there any DIY repair tips for OBDII code B0014:0D?

- DIY repair for OBDII code B0014:0D may involve checking and repairing any visible wiring damage in the driver seat side airbag system. However, due to the critical nature of airbag systems, it is recommended to have the repair done by a professional.

7. How much does it cost to fix OBDII code B0014:0D?

- The cost of fixing OBDII code B0014:0D can vary depending on the specific cause of the issue and the labor rates in your area. It may involve replacing components like the airbag module, wiring harness, or the driver seat side airbag itself.

8. Can resetting the OBDII code B0014:0D fix the issue?

- Simply resetting the code without addressing the underlying cause, such as high resistance in the driver seat side airbag deployment loop, is unlikely to fix the issue permanently. It is important to diagnose and repair the root cause of the problem.

9. What should I do if OBDII code B0014:0D keeps coming back after repair?

- If the code B0014:0D keeps reoccurring after repair, it indicates that the issue with the driver seat side airbag system has not been fully resolved. It is advisable to reinspect the system for any missed faults or have a professional diagnose the problem.

10. Is it safe to drive if the driver seat side airbag is not functioning due to OBDII code B0014:0D?

- It is not recommended to drive without a properly functioning driver seat side airbag, as it is a critical safety feature designed to protect you in the event of a side impact collision. It is important to have the issue diagnosed and repaired promptly.