B0013:0D Code - Driver Steering Wheel Air Bag Deployment Loop Stage 2 High Resistance
Quick Answer
During a frontal crash of sufficient force, the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy the steering wheel air bag. Common causes include Faulty Steering Wheel Air Bag, Faulty Steering Wheel Air Bag Coil, Steering Wheel Air Bag harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0013:0D indicates Driver Steering Wheel Air Bag Deployment Loop Stage 2 High Resistance.
- Common causes
- Common causes include Faulty Steering Wheel Air Bag, Faulty Steering Wheel Air Bag Coil, Steering Wheel Air Bag harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0013:0D Description
What are the Possible Causes of the DTC B0013:0D?
- Faulty Steering Wheel Air Bag
- Faulty Steering Wheel Air Bag Coil
- Steering Wheel Air Bag harness is open or shorted
- Steering Wheel Air Bag circuit poor electrical connection
- Faulty Sensing and Diagnostic Module (SDM)
How to Fix the DTC B0013:0D?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0013:02 Driver Frontal Deployment Loop Stage 2 Short to Ground
B0013:04 Driver Frontal Deployment Loop Stage 2 Open Circuit
B0013:0D Driver Frontal Deployment Loop Stage 2 High Resistance
B0013:0E Driver Frontal Deployment Loop Stage 2 Low Resistance
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0013:0D code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0013:0D code?
Need more information on how to fix the B0013:0D code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0013:0D code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0013:0D Code
1. What are common symptoms of OBDII code B0013:0D (Driver Steering Wheel Air Bag Deployment Loop Stage 2 High Resistance)?
- Common symptoms may include the airbag warning light illuminating on the dashboard, a non-functional horn, or failure of the airbag system to deploy in an accident.
2. What can cause the OBDII code B0013:0D to trigger?
- The code B0013:0D is typically triggered by high resistance in the driver steering wheel airbag deployment loop, which could be caused by a faulty airbag clock spring, loose connections, or damaged wiring.
3. How serious is the OBDII code B0013:0D (Driver Steering Wheel Air Bag Deployment Loop Stage 2 High Resistance)?
- This code indicates a potential issue with the driver's airbag system, which could compromise safety in the event of a collision. It is essential to address this issue promptly.
4. Can I continue driving with the OBDII code B0013:0D present?
- It is not recommended to continue driving with this code present, as it signifies a problem with the driver's airbag deployment system. It is best to address the issue as soon as possible.
5. How can I diagnose and repair OBDII code B0013:0D?
- Diagnosis typically involves inspecting the airbag system components, checking for loose connections, testing the clock spring, and verifying the wiring integrity. Repair may involve replacing faulty components and clearing the code.
6. Is it safe to reset the OBDII code B0013:0D without fixing the underlying issue?
- It is not safe to simply reset the code without addressing the root cause, as it could lead to the airbag system failing to deploy properly in an accident. Always diagnose and repair the issue before clearing the code.
7. Can a DIY enthusiast fix the OBDII code B0013:0D issue?
- While some DIY enthusiasts with automotive repair experience may be able to diagnose and fix this issue, it is crucial to have the proper tools, knowledge, and caution when dealing with airbag systems due to safety concerns.
8. How much does it typically cost to repair OBDII code B0013:0D?
- The cost of repairing this code can vary depending on the underlying cause and the labor rates of the repair shop. It may involve replacing components like the clock spring, which can range from $200 to $500 or more.
9. How long does it take to repair OBDII code B0013:0D?
- The repair time for this code can vary based on the extent of the issue and the availability of parts. It may take a few hours to a full day for a skilled technician to diagnose and repair the problem.
10. Is it necessary to visit a dealership for OBDII code B0013:0D repair?
- While a dealership may have specialized knowledge and tools for this repair, independent automotive repair shops with experienced technicians can also effectively diagnose and repair the issue.
Discuss the causes and fixes for B0013:0D OBDII Code
Code B0013:0D comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
