AutoCodes – Generic – B0013:02

B0013:02 Code - Driver Steering Wheel Air Bag Deployment Loop Stage 2 Short to Ground

Quick Answer

During a frontal crash of sufficient force, the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy the steering wheel air bag. Common causes include Faulty Steering Wheel Air Bag, Faulty Steering Wheel Air Bag Coil, Steering Wheel Air Bag harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0013:02 indicates Driver Steering Wheel Air Bag Deployment Loop Stage 2 Short to Ground.
Common causes: Common causes include Faulty Steering Wheel Air Bag, Faulty Steering Wheel Air Bag Coil, Steering Wheel Air Bag harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 302

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0013:02 Description

During a frontal crash of sufficient force, the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy the steering wheel air bag. The SDM performs continuous diagnostic tests on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. There are two shorting bars used within the steering wheel air bag coil connector which will short together both steering wheel air bag stage 1 high control circuit and steering wheel air bag stage 1 low control circuit and both steering wheel air bag stage 2 high control circuit and steering wheel air bag stage 2 low control circuit when the connector is disconnected. This will help to prevent unwanted deployment of the steering wheel air bag during servicing. The Diagnostic Trouble Code (DTC) will be set when the steering wheel air bag deployment loop is shorted to ground for 2 s.

OBDII Code B0013:02 - Driver Steering Wheel Air Bag Deployment Loop Stage 2 Short to Ground - AutoCodes.com — B0013:02 Code - Driver Steering Wheel Air Bag Deployment Loop Stage 2 Short to Ground

What does this mean?

What are the Possible Causes of the DTC B0013:02?

Faulty Steering Wheel Air Bag
Faulty Steering Wheel Air Bag Coil
Steering Wheel Air Bag harness is open or shorted
Steering Wheel Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0013:02?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0013:01 Driver Frontal Deployment Loop Stage 2 Short to Battery
B0013:02 Driver Frontal Deployment Loop Stage 2 Short to Ground
B0013:04 Driver Frontal Deployment Loop Stage 2 Open Circuit
B0013:0D Driver Frontal Deployment Loop Stage 2 High Resistance
B0013:0E Driver Frontal Deployment Loop Stage 2 Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0013:02 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0013:02 code?

Need more information on how to fix the B0013:02 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0013:02 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0013:02 Code

1. What are the common symptoms of OBDII code B0013:02?

- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the driver's steering wheel airbag deployment.

2. What does the OBDII code B0013:02 indicate?

- This code indicates a problem with the Driver Steering Wheel Air Bag Deployment Loop Stageâ€‰2 being short to ground, meaning there is an electrical issue affecting the airbag system.

3. What are the possible causes of OBDII code B0013:02?

- Potential causes include damaged wiring in the airbag system, a faulty clock spring, a malfunctioning airbag control module, or a problem with the airbag itself.

4. How can I diagnose the issue related to OBDII code B0013:02?

- Diagnosing this issue typically involves using a professional OBDII scanner to read and interpret the code, as well as conducting a thorough inspection of the airbag system components for any visible damage or issues.

5. Is it safe to drive with OBDII code B0013:02 present?

- It is not recommended to drive the vehicle with this code present, as it indicates a potential problem with the driver's steering wheel airbag deployment, which could compromise safety in the event of a collision.

6. How can I repair OBDII code B0013:02?

- Repairing this code often involves identifying and fixing the root cause of the electrical short to ground, which may require repairing or replacing damaged wiring, components, or modules in the airbag system.

7. Can I reset OBDII code B0013:02 on my own?

- While you can clear the code with an OBDII scanner, it is crucial to address the underlying issue causing the code to prevent potential safety risks and ensure the airbag system functions properly.

8. Are there any safety precautions to take when working on OBDII code B0013:02?

- It is essential to disconnect the vehicle's battery before working on the airbag system to prevent accidental deployment, as well as following proper safety procedures outlined in the vehicle's service manual.

9. How much does it cost to repair OBDII code B0013:02 at a mechanic?

- The cost of repairing this code can vary depending on the extent of the damage and the specific components that need to be repaired or replaced, so it is recommended to get a professional diagnosis and estimate from a mechanic.

10. Can OBDII code B0013:02 be intermittent or recurring?

- Yes, this code can be intermittent, meaning the issue may come and go, but it is essential to address it promptly to ensure the proper functioning of the airbag system and maintain vehicle safety.