B0010 Infiniti Code - Passenger Air Bag Module
Quick Answer
The Passenger Air Bag Module is dual stage or single stage and is wired to the Air Bag Diagnosis Sensor Unit. Common causes include Faulty Passenger Air Bag Module, Passenger Air Bag Module harness is open or shorted, Passenger Air Bag Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0010 Infiniti indicates Passenger Air Bag Module.
- Common causes
- Common causes include Faulty Passenger Air Bag Module, Passenger Air Bag Module harness is open or shorted, Passenger Air Bag Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0010 Infiniti Description
What are the Possible Causes of the DTC B0010 Infiniti?
- Faulty Passenger Air Bag Module
- Passenger Air Bag Module harness is open or shorted
- Passenger Air Bag Module circuit poor electrical connection
- Faulty Air Bag Diagnosis Sensor Unit
How to Fix the DTC B0010 Infiniti?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0010 Infiniti code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0010 Infiniti code?
Need more information on how to fix the B0010 Infiniti code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0010 Infiniti code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0010 Infiniti Code
1. What are common symptoms of OBDII code B0010 in an Infiniti related to the Passenger Air Bag Module?
The most common symptoms include the airbag warning light staying illuminated on the dashboard and a message indicating an issue with the passenger airbag system.
2. What could cause OBDII code B0010 to trigger in an Infiniti?
The code B0010 typically indicates a fault in the Passenger Air Bag Module, which can be caused by a malfunctioning airbag sensor, wiring issues, or a faulty module.
3. How serious is OBDII code B0010 in an Infiniti?
Code B0010 should be taken seriously as it indicates a potential problem with the passenger airbag system, which may affect its functionality in the event of a collision.
4. Can I continue driving my Infiniti with OBDII code B0010 present?
It is not recommended to continue driving with the airbag warning light on, as the passenger airbag system may not deploy correctly in case of an accident.
5. How can I diagnose and repair OBDII code B0010 in my Infiniti?
Diagnosing and repairing code B0010 often requires professional diagnostic equipment to pinpoint the exact cause, such as testing the sensors, checking the wiring for damage, and potentially replacing the Passenger Air Bag Module.
6. Are there any DIY tips for troubleshooting OBDII code B0010 in an Infiniti?
While basic checks like inspecting the wiring connections for damage or corrosion can be done DIY, diagnosing and repairing code B0010 usually requires advanced tools and expertise best handled by a qualified technician.
7. How much does it cost to fix OBDII code B0010 in an Infiniti?
The cost of repairing code B0010 can vary depending on the exact cause of the issue, but it may involve expenses for parts replacement, labor, and diagnostic services.
8. Can OBDII code B0010 be reset in an Infiniti without fixing the underlying issue?
Resetting the code without addressing the root cause will only temporarily clear the warning light, and the issue will likely reappear once the system detects the fault again.
9. Is there a recall for OBDII code B0010 affecting certain Infiniti models?
Recalls related to code B0010 may vary by model year and region, so it's advisable to check with the manufacturer or a dealership to see if your specific Infiniti is affected.
10. How can I prevent OBDII code B0010 from occurring in my Infiniti in the future?
Regular maintenance checks, addressing any warning lights promptly, and ensuring the airbag system is inspected during routine services can help prevent code B0010 and other related issues from arising.
Discuss the causes and fixes for B0010 Infiniti OBDII Code
Code B0010 Infiniti comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
