AutoCodes – Honda – B0010 Honda

B0010 Honda Code - Decreased Resistance In The Passenger Airbag First Inflator

Quick Answer

The Driver Side Airbag is located in the center of the steering wheel. Common causes include Faulty Passenger Side Airbag, Passenger Side Airbag harness is open or shorted, Passenger Side Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0010 Honda indicates Decreased Resistance In The Passenger Airbag First Inflator.
Common causes: Common causes include Faulty Passenger Side Airbag, Passenger Side Airbag harness is open or shorted, Passenger Side Airbag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 12,663

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 18, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0010 Honda Description

The Driver Side Airbag is located in the center of the steering wheel. The front passenger side airbag is located in the dashboard on the front passenger side. The airbag modules adopt dual inflators for the driver side and/or the front passenger side airbag according to the specifications. The dual inflators increase airbag effectiveness by properly adjusting the timing when the two inflators are ignited (together or sequentially) referring to the collision speed or collision impact.

OBDII Code B0010 Honda - Decreased Resistance In The Passenger Airbag First Inflator - AutoCodes.com — B0010 Honda Code - Decreased Resistance In The Passenger Airbag First Inflator

What does this mean?

What are the Possible Causes of the DTC B0010 Honda?

Faulty Passenger Side Airbag
Passenger Side Airbag harness is open or shorted
Passenger Side Airbag circuit poor electrical connection
Faulty Steering Wheel Clockspring

How to Fix the DTC B0010 Honda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0010:1A Decreased Resistance In The Passenger Side Airbag First Inflator DTC
B0010:11 Short To Ground In The Passenger Side Airbag First Inflator
B0010:12 Short To Power In The Passenger Side Airbag First Inflator
B0010:13 Open Or Increased Resistance In The Passenger Side Airbag First Inflator

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0010 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0010 Honda code?

Need more information on how to fix the B0010 Honda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0010 Honda code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0010 Honda Code

1. What are the common symptoms of OBDII code B0010 in a Honda related to decreased resistance in the passenger airbag first inflator?

The common symptoms include the airbag warning light illuminating on the dashboard, potential passenger airbag system failure, and a diagnostic trouble code (DTC) B0010 being stored in the vehicle's computer.

2. What are the possible causes of OBDII code B0010 in a Honda?

The primary cause of OBDII code B0010 in a Honda is decreased resistance in the passenger airbag first inflator circuit. This could be due to a damaged inflator, faulty wiring, connector issues, or a malfunctioning airbag control module.

3. How can I diagnose the issue causing OBDII code B0010 in my Honda?

Diagnosing the issue requires specialized diagnostic equipment to read the trouble codes and pinpoint the source of the problem. It is recommended to consult a professional mechanic or dealership for an accurate diagnosis.

4. Can I repair OBDII code B0010 in my Honda by myself?

Repairing OBDII code B0010 usually requires specialized knowledge and tools. It is recommended to have a qualified technician inspect and repair the issue to ensure the passenger airbag system functions correctly and safely.

5. Are there any safety concerns associated with OBDII code B0010 in a Honda?

Yes, there are safety concerns associated with OBDII code B0010, as it indicates a potential issue with the passenger airbag system. It is crucial to address this problem promptly to ensure the airbag functions properly in the event of a collision.

6. How much does it typically cost to repair OBDII code B0010 in a Honda?

The cost of repairing OBDII code B0010 in a Honda can vary depending on the exact cause of the issue and the required repairs. It is advisable to consult with a mechanic for a specific cost estimate.

7. Can driving with OBDII code B0010 present any risks?

Driving with OBDII code B0010 can pose risks in the event of a collision, as the passenger airbag system may not deploy properly. It is recommended to address this issue promptly to ensure the safety of all occupants in the vehicle.

8. Is it necessary to reset the airbag system after repairing OBDII code B0010 in a Honda?

Yes, it is essential to reset the airbag system after repairing OBDII code B0010 to clear the trouble code and ensure the system is functioning correctly. Failure to reset the system may result in the airbag warning light remaining illuminated.

9. Can OBDII code B0010 in a Honda be intermittent?

Yes, OBDII code B0010 in a Honda can be intermittent, with the airbag warning light turning on and off sporadically. It is crucial to address this issue even if it appears to be intermittent to prevent any potential safety hazards.

10. How long does it typically take to repair OBDII code B0010 in a Honda?

The repair time for OBDII code B0010 can vary depending on the exact cause of the issue and the extent of repairs needed. It is best to consult with a professional technician for an accurate estimate of the repair time.