AutoCodes – Acura – B0010 Acura

B0010 Acura Code - Decreased Resistance In The Passenger Airbag First Inflator

Quick Answer

The Driver Side Airbag is located in the center of the steering wheel. Common causes include Faulty Passenger Side Airbag, Passenger Side Airbag harness is open or shorted, Passenger Side Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0010 Acura indicates Decreased Resistance In The Passenger Airbag First Inflator.
Common causes: Common causes include Faulty Passenger Side Airbag, Passenger Side Airbag harness is open or shorted, Passenger Side Airbag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,834

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 18, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0010 Acura Description

The Driver Side Airbag is located in the center of the steering wheel. The front passenger side airbag is located in the dashboard on the front passenger side. The airbag modules adopt dual inflators for the driver side and/or the front passenger side airbag according to the specifications. The dual inflators increase airbag effectiveness by properly adjusting the timing when the two inflators are ignited (together or sequentially) referring to the collision speed or collision impact.

OBDII Code B0010 Acura - Decreased Resistance In The Passenger Airbag First Inflator - AutoCodes.com — B0010 Acura Code - Decreased Resistance In The Passenger Airbag First Inflator

What does this mean?

What are the Possible Causes of the DTC B0010 Acura?

Faulty Passenger Side Airbag
Passenger Side Airbag harness is open or shorted
Passenger Side Airbag circuit poor electrical connection
Faulty Steering Wheel Clockspring

How to Fix the DTC B0010 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0010:1A Decreased Resistance In The Passenger Side Airbag First Inflator DTC
B0010:11 Short To Ground In The Passenger Side Airbag First Inflator
B0010:12 Short To Power In The Passenger Side Airbag First Inflator
B0010:13 Open Or Increased Resistance In The Passenger Side Airbag First Inflator

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0010 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0010 Acura code?

Need more information on how to fix the B0010 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0010 Acura code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0010 Acura Code

1. What are common symptoms of OBDII code B0010 in an Acura related to decreased resistance in the passenger airbag first inflator?

The common symptoms include an illuminated airbag warning light on the dashboard and a potential inability of the passenger airbag to deploy in case of an accident.

2. What could cause the OBDII code B0010 in an Acura indicating decreased resistance in the passenger airbag first inflator?

This code is typically triggered by issues such as a faulty passenger airbag inflator or problems with the wiring and connections associated with the airbag system.

3. How can I diagnose the issue related to OBDII code B0010 in my Acura?

To diagnose the problem, it is recommended to use a diagnostic scanner to retrieve the specific fault codes, inspect the passenger airbag system components for any visible damage, and test the resistance in the airbag inflator circuit.

4. Is it safe to drive my Acura with the OBDII code B0010 indicating decreased resistance in the passenger airbag first inflator?

It is not advisable to drive the vehicle when this code is present, as it indicates a potential safety issue with the passenger airbag system. Prompt attention and repair are necessary.

5. Can I reset the OBDII code B0010 in my Acura without addressing the underlying issue?

Resetting the code without fixing the root cause will likely result in the code reappearing once the system detects the persisting problem. It is important to address the issue to ensure proper functionality and safety.

6. What are the repair options for OBDII code B0010 in an Acura?

Repair options include replacing the faulty passenger airbag inflator, repairing damaged wiring or connectors, and resetting the airbag system after the issue has been resolved.

7. How much does it cost to fix OBDII code B0010 related to decreased resistance in the passenger airbag first inflator in an Acura?

The cost of repair can vary depending on the specific cause of the issue, parts needed, and labor costs. It is recommended to consult with a certified mechanic for an accurate estimate.

8. Can I fix the OBDII code B0010 issue in my Acura myself, or do I need to take it to a professional?

While some DIY enthusiasts may have the skills to address the issue, working on airbag systems can be complex and dangerous. It is generally recommended to seek assistance from a qualified technician for safety and proper repair.

9. What precautions should I take when dealing with the passenger airbag system in my Acura to resolve the OBDII code B0010?

It is crucial to disconnect the vehicle's battery before working on the airbag system to avoid accidental deployment. Following proper safety procedures and using appropriate tools are essential when handling airbag components.

10. How often should I have the passenger airbag system in my Acura inspected to prevent issues like OBDII code B0010 from occurring?

Regular inspections as part of routine maintenance checks, especially after any significant impact or accident, can help in identifying potential issues early and ensuring the proper functioning of the airbag system in your Acura.