B0003 Code - Driver Frontal Stage 3 Deployment Control
Quick Answer
The Sophisticated Air Bag Sensor (SAS) Control Module sets the OBDII code when the configuration has not been set. Common causes include Sophisticated Air Bag Sensor (SAS) Control Module Configuration Error, Faulty Sophisticated Air Bag Sensor (SAS) Control Module, Sophisticated Air Bag Sensor (SAS) Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0003 indicates Driver Frontal Stage 3 Deployment Control.
- Common causes
- Common causes include Sophisticated Air Bag Sensor (SAS) Control Module Configuration Error, Faulty Sophisticated Air Bag Sensor (SAS) Control Module, Sophisticated Air Bag Sensor (SAS) Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0003 Description
What are the Possible Causes of the DTC B0003?
- Sophisticated Air Bag Sensor (SAS) Control Module Configuration Error
- Faulty Sophisticated Air Bag Sensor (SAS) Control Module
- Sophisticated Air Bag Sensor (SAS) Control Module harness is open or shorted
- Sophisticated Air Bag Sensor (SAS) Control Module circuit poor electrical connection
How to Fix the DTC B0003?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0003 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0003 code?
Need more information on how to fix the B0003 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0003 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B0003 Mazda — Driver Frontal Stage 3 Deployment Control
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0003 Code
1. What are common symptoms of OBDII code B0003 (Driver Frontal Stage 3 Deployment Control)?
The common symptoms of this code may include the airbag warning light illuminated on the dashboard and a diagnostic trouble code stored in the vehicle's computer.
2. What are the possible causes of OBDII code B0003?
Possible causes of this code include a faulty driver frontal airbag module, damaged wiring harness, poor electrical connection, or a problem with the airbag control module.
3. How can I diagnose OBDII code B0003?
Diagnosing this code typically involves using a diagnostic scanner to retrieve the trouble code, conducting visual inspections of the airbag system components, and performing specific electrical tests to pinpoint the issue.
4. Can I drive my vehicle with OBDII code B0003?
It is not recommended to drive your vehicle with this code present, as it indicates a potential issue with the driver frontal airbag system, which may compromise your safety in the event of a collision.
5. How do I repair OBDII code B0003?
Repairing this code may involve replacing the faulty driver frontal airbag module, repairing or replacing damaged wiring, ensuring proper electrical connections, or reprogramming the airbag control module as necessary.
6. Is it safe to reset the OBDII code B0003 without fixing the underlying issue?
Resetting the code without addressing the underlying problem is not advised, as it may lead to the airbag system not functioning properly in case of an accident, putting you at risk.
7. Can OBDII code B0003 be triggered by a loose connection?
Yes, a loose or poor electrical connection within the driver frontal airbag system can trigger this code, so it's essential to check all connections during diagnosis.
8. How much does it typically cost to repair OBDII code B0003?
The cost of repairing this code can vary depending on the specific issue, but it may range from a couple of hundred dollars to over a thousand dollars, including parts and labor.
9. Will OBDII code B0003 cause my airbags to not deploy in an accident?
If this code is present, there is a risk that the driver frontal airbag may not deploy properly in a collision, so it's crucial to address the issue promptly to ensure the airbag system functions as intended.
10. How long does it take to repair OBDII code B0003?
The repair time for this code can vary based on the exact cause of the issue, but it may take a few hours to a full day to diagnose, repair, and test the driver frontal airbag system thoroughly.
Discuss the causes and fixes for B0003 OBDII Code
-
I have a 2012 Dodge Charger with a b0003 code can anybody tell me where to look at to fix this airbag light
-
Please double check the code, I can't find any information for the B0003 in the 2012 Dodge Charge factory service manual
-
Actually the name says b003 driver frontal active stage 3 deployment control sub fault and I also have a p1811
-
But the "B003" is not a good OBDII code. An OBDII code should have a total of 5 digits and not 4.
Unfortunately there is no information for the P1811 code either. You should check with another OBDII scanner.
-
Hi I have a Toyota Yaris 2017 model IA with the code B000353 how can I fix the problem with that code?
-
Have your vehicle ever been in an accident? either the Airbag Control Module needs be configured or needs to be replace.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
