P0335 2005 Nissan Altima Sedan Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2005 Nissan Altima Sedan indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2005 Nissan Altima Sedan Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2005 Nissan Altima Sedan?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2005 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2005 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2005 Nissan Altima Sedan code?
Need more information on how to fix the P0335 2005 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2005 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2005 Nissan Altima Sedan Code
1. What does the OBDII code P0335 mean on a 2005 Nissan Altima Sedan?
P0335 indicates a malfunction in the crankshaft position sensor circuit, meaning the engine control module (ECM) isn't receiving proper signals from the sensor.
2. What are the symptoms of a P0335 code in a 2005 Nissan Altima?
Common symptoms include difficulty starting the engine, stalling, rough idling, poor acceleration, or the engine not starting at all.
3. What causes the P0335 code to appear on a 2005 Nissan Altima?
Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors, a failed ECM, or issues with the sensor's reluctor ring.
4. Can a bad crankshaft position sensor damage the engine?
While it may not directly damage the engine, ignoring a faulty sensor can cause drivability issues and lead to long-term wear on engine components.
5. How do you diagnose the P0335 code in a 2005 Nissan Altima?
Diagnosis involves checking the crankshaft position sensor, inspecting the sensor wiring and connectors for damage, and testing the sensor signal with a multimeter or scan tool.
6. How can you fix the P0335 code on a 2005 Nissan Altima?
Repairs typically include replacing the crankshaft position sensor, fixing damaged wiring or connectors, or in rare cases, replacing the ECM.
7. Where is the crankshaft position sensor located on a 2005 Nissan Altima?
The crankshaft position sensor is usually located near the bottom of the engine, close to the crankshaft or transmission bell housing.
8. Is it safe to drive with a P0335 code on a 2005 Nissan Altima?
Driving with this code is not recommended, as it can cause stalling or make the car unreliable, potentially leaving you stranded.
9. How much does it cost to fix the P0335 code on a 2005 Nissan Altima?
The cost to replace the crankshaft position sensor typically ranges from $100 to $250, depending on parts and labor rates.
10. Can a weak battery cause a P0335 code on a 2005 Nissan Altima?
A weak battery is unlikely to directly cause this code, but electrical issues, such as low voltage, can sometimes interfere with sensor operation.
Discuss the causes and fixes for P0335 2005 Nissan Altima Sedan OBDII Code
-
i have Altima 2005 has same problem..P0335 always appear while reach distance about 20km.
many time cancelled by scanner or by removing negative terminal of battery.
no any part replaced except battery..any advice?
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
